Using 32GB Flare X with Asrock X370 Taichi?
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=8722
Printed Date: 25 Apr 2024 at 11:38pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Using 32GB Flare X with Asrock X370 Taichi?
Posted By: shmerl
Subject: Using 32GB Flare X with Asrock X370 Taichi?
Date Posted: 19 May 2018 at 1:46am
|
" rel="nofollow - Does anyone know if Asrock X370 Taichi + Ryzen 7 2700X would work with
G.SKILL Flare X 32GB (4 x 8GB) at 3200 MHz? It works fine with two 8GB
Flare X sticks at 3200 MHz, but I've heard that 4 sticks are harder to
run at that frequency. G.Skill have a Flare X set like this (4x8GB, 3200 MHz, 14-14-14-34 latency), but Asrock's QVL doesn't list it. |
Replies:
Posted By: Reinvented
Date Posted: 19 May 2018 at 2:06am
| It really depends on the IMC and what it's capable of. You'll have to do some tweaking for sure to get it running. And YMMV on what's considered stable. You'll definitely have to relax timings, and definitely be running it at 2T. I do not think you'll be able to use XMP profiles at all for this either. |
Posted By: shmerl
Date Posted: 19 May 2018 at 2:25am
" rel="nofollow -
Is is Zen+ IMC in 2700X good enough for it?
What do you mean by 2T?
What is a good way to calculate RAM timings? Someone helped me before with my current two stick Flare X, and indeed it doesn't work as well with XMP profile, but works fine with custom timings.
|
Reinvented wrote:Posted By: Reinvented
Date Posted: 19 May 2018 at 2:36am
It should do fine. You'll definitely have to raise SoC voltage up a bit to compensate for 32 GB's/4 DIMMs. 1T timings run as default when clocking with 2 DIMM's (tighter). It's also known as command rate. 4 DIMM's requires 2T, which is more relaxed. I don't have 4 sticks to test, but you should be able to use the Ryzen DRAM Calculator just fine. Just set it appropriately for B-die and 4 dimms, and see what values it returns. It might return tighter values, but at that point, relax the timings a bit more till it gets stable.
|
Posted By: shmerl
Date Posted: 19 May 2018 at 3:01am
|
Ah, I had issues with running Ryzen DRAM calculator in Wine on Linux in the past (basically it didn't work). I'll give it a try again. |
Posted By: Reinvented
Date Posted: 19 May 2018 at 3:21am
| Don't use Wine. Use it from Windows... |
Posted By: shmerl
Date Posted: 19 May 2018 at 5:42am
No Windows :) I'd rather file a Wine bug if it still doesn't work.
|
Posted By: datonyb
Date Posted: 19 May 2018 at 6:43am
just chuck an old hard drive in run ram calculator set it up and go back to linux ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: shmerl
Date Posted: 19 May 2018 at 7:06am
The author really should open source it, and someone can rewrite it without .NET. There is no point to keep it closed.
|