cant get x470 K4 to recognize NVME
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=8729
Printed Date: 19 Jul 2025 at 8:00am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: cant get x470 K4 to recognize NVME
Posted By: TitanX
Subject: cant get x470 K4 to recognize NVME
Date Posted: 19 May 2018 at 10:42am
|
" rel="nofollow - I just built a system with the following parts: x470 K4 Fatali1y mobo Ryzen 5 2600x TridentZ 3200 CL14 ram Samsung 970 PRO NVME SSD Seasonic ultra prime 750w PSU Sapphire RX580 8GB in the primary x16 PCIe slot going to use Win10 PRO 64 via USB install Put it all together fine, but i cannot get the bios (or the win 10 install) to recognize the 970. The 970 is in the M.2-1 (ultra) slot. I have the CSM set for UEFI only (there are no other drives connected). Also have the Launch Storage OpROM set to UEFI. In the boot order i have the UEFU windows media set as the 1st boot item, which it does boot into the windows loader, but doesnt see any drives to install on. Please, please help.!! secondarily, i have the 2x8gb ram sticks in the A2-B2 slots and the bios is only reading single channel?
|
Replies:
Posted By: repens
Date Posted: 19 May 2018 at 7:04pm
I'm not sure what is wrong with your NVME, but I wanted to post that I am having the same issue with my G.Skill RAM. I haven't been able to figure out what is wrong yet 
|
Posted By: TitanX
Date Posted: 19 May 2018 at 7:46pm
| dead m2 slot...sent board back. ordered a different brand board that has this specific ram on the qvl |