x470 Master Connections from front of Case
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=8767
Printed Date: 13 Jun 2024 at 5:00pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: x470 Master Connections from front of Case
Posted By: Hugh
Subject: x470 Master Connections from front of Case
Date Posted: 24 May 2018 at 6:19am
|
" rel="nofollow - The X470 Master SLI/ac motherboard manual lists its connectors on pages 1 and 2. However, my Fractal case has double wires labeled 'HDD LED', 'Power SW', and 'Rest SW', as well as single wires labeled 'Power LED-', and 'Power LED+'. There are no corresponding pin connectors listed on page 4 of the manual. How can I connect the right wires to the correct pins? Cheers, Hugh ------------- Hughman |
Replies:
Posted By: MNMadman
Date Posted: 24 May 2018 at 8:37am
|
Those are the front panel connectors. It's item 16 on page 7 of the manual. The specific pins are labeled there. They are the bottom-right set of pins on the board, right below the M2_2 connector. They should be labeled on the board as well. ------------- Heatripper Threadkiller // 1950X @ 4.141GHz 16C/16T // Taichi // 32GB 3232 RAM // // Titan Xp @ 2075MHz/12,000MHz // 2TB+512GB NVMe SSDs // Custom Liquid Cooling Loop // |
Posted By: datonyb
Date Posted: 25 May 2018 at 1:13am
|
the led connectors are position critical eg find the + and make sure it goes the the board + the pwr sw and reset sw can be either way ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: Hugh
Date Posted: 25 May 2018 at 11:57am
|
MNMadamn; Thanks much for taking the trouble to reply. Page 16 of the manual merely contains a picture of a CPU and page 7 contains information about a WiFi antenna. You must be referring to some other manual. I worked out that the connections are supposed to be made to the 'System Panel Header', as you say. However, I can't find any instructions about which pins, in what configurations, must be connected to the pins on that header. That was why I originally posted my question. I still haven't found the answer. Cheers, Hugh ------------- Hughman |
Posted By: Hugh
Date Posted: 25 May 2018 at 12:03pm
|
datonyb; Thanks for your suggestion. I take it that you mean that the 'Power SW' and 'Reset SW' can be connected either way -- either upside down or vice versa. But do they have to connected to particular pins on the System Panel Header. That is not mentioned in the manual, and I am still trying to find out the answer. Cheers, Hugh ------------- Hughman |
Posted By: kerberos_20
Date Posted: 25 May 2018 at 12:31pm
------------- http://valid.x86.fr/diq4l4" rel="nofollow">  http://www.userbenchmark.com/UserRun/47132492" rel="nofollow - userbenchmark |
Posted By: kerberos_20
Date Posted: 25 May 2018 at 12:35pm
------------- http://valid.x86.fr/diq4l4" rel="nofollow"> http://www.userbenchmark.com/UserRun/47132492" rel="nofollow - userbenchmark |
Posted By: Hugh
Date Posted: 26 May 2018 at 3:46pm
|
kerberos_20; Thanks kindly for the information. Problem solved, thanks to you. Cheers, Hugh ------------- Hughman |