RAM cannot overclocking
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=8777
Printed Date: 19 Jul 2025 at 5:05am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: RAM cannot overclocking
Posted By: Nayeli
Subject: RAM cannot overclocking
Date Posted: 25 May 2018 at 5:09pm
|
" rel="nofollow - After creating a RAID 0, RAM cannot overclocking. Tried XMP profile or manual overclocking nothing help. I use 1600X CPU and 2 SATA SSD on x370 gaming x Maybe there is some solution unknown? |
Replies:
Posted By: ASRock_TSD
Date Posted: 25 May 2018 at 5:36pm
|
Dear Nayeli, Greetings, this is ASRock TSD. We install two DDR4-3000 8GB RAM on DIMM A2 and B2. Then enable XMP profile to work at 2933 speed.  After that, we connect two SSD 256GB on SATA ports. Then we set up to RAID mode, and configure a RAID0 volume in RAID ROM interface. We enter to BIOS and check the DRAM speed is still at 2933.  For this case, we provide following suggestions: 1. Please install memory on A2 and B2 slot. 2. Please re-load XMP profile and set DRAM frequency manually. 3. Please increase a little DRAM voltage for verifying. 4. Please loose the DRAM timing. 5. Please delete the RAID0 volume and follow above suggestions to check again. Then create RAID0. Thanks! All the best, ASRock TSD |
Posted By: Xaltar
Date Posted: 25 May 2018 at 5:45pm
If you look at Support's pics, you will see they used BIOS 4.60 for testing. If you are using an older BIOS version that could be where the problem is coming from  ------------- 
|