Hello everyone. I'm planning on sending this post to Asrock as well, but
I wanted to post here as well to see if anyone has a similar
experience.
BIOS 1.20 (2014/7/28) is the BIOS that comes with
the board. It's fine but does not support Above 4G decoding and of
course it's old, so doesn't contain the microcode patches that the newer
ones do. It also has this MOLEX warning splash screen when you install
more than 2 cards that you can bypass with a keypress. It is the newer
style UEFI type of BIOS that is found in most motherboards nowadays.
BIOS
1.30B (2018/2/27) is the second BIOS update for this board. This is the
one I've been using for a few months now and it's been great. It does
support Above 4G decoding, and has no splash screen, even if you install
more than 2 cards, but the strange thing is that it uses the older BIOS
style screen and not the more modern UEFI style screens. This is the
BIOS I'll continue to use for now.
BIOS 1.40 (2018/5/21) is the
latest BIOS update for this board and has some very peculiar behavior.
The release notes signify "Update CPU Microcode", however it does not
support above 4G decoding (just like 1.20), has the newer style UEFI
screen (just like 1.20), and has that MOLEX warning splash screen when
you install more than 2 cards (just like 1.20). The only problem is that
you can't bypass the splash screen when you have more than 2 cards
installed.
Here is an imgur gallery of all 3 BIOSs. Any users of this board experience the same problems? https://imgur.com/a/2bl2nEd" rel="nofollow - https://imgur.com/a/2bl2nEd
|