Power adapter for ASRock Vision 3D
Printed From: ASRock.com
Category: Technical Support
Forum Name: HTPC&Gaming Barebone&Others
Forum Description: Question about HTPC&Gaming Barebone&Others
URL: https://forum.asrock.com/forum_posts.asp?TID=9027
Printed Date: 21 May 2024 at 8:58am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Power adapter for ASRock Vision 3D
Posted By: jeffport
Subject: Power adapter for ASRock Vision 3D
Date Posted: 27 Jun 2018 at 6:54am
|
" rel="nofollow - Hi, I have lost the power adapter for my ASRock Vision 3D Mini PC. Where can I buy a replacement, and what model number / specs should I be searching for online? Thanks very much.
|
Replies:
Posted By: Xaltar
Date Posted: 27 Jun 2018 at 7:35am
|
The power supply is listed as a 19v 90w adapter on the product specs page. The model I found on a review website (in Russian so I won't bother with a link) is: Delta Electronics: ADP-90CD DB 19v ---- 4.74A 90W Taken from the unboxing pics of the power brick's spec sticker. I hope that helps  ------------- 
|
Posted By: jeffport
Date Posted: 27 Jun 2018 at 7:54am
|
" rel="nofollow - Funny I had found that same Russian website before posting my question :) This is helpful, but I was not able to find that exact model online. I know it has to be 19V 90W - what I am missing is what the size of the connector should be. I ordered a 5.5mm 1.7mm connector but the inner diameter was too small. So it has to be either 5.5mm 2.1mm or 5.5mm 2.5mm. Any ideas which? Thanks again.
|
Posted By: jeffport
Date Posted: 11 Jul 2018 at 4:22am
|
" rel="nofollow - For future reference, this power adapter works and fits perfectly for ASRock Vision 3D: https://www.amazon.com/gp/product/B074QLP7WF/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 Specs you should look for: 19V 90W 5.5mm outer diameter 2.5mm inner diameter Good luck
|