AB350 Pro4 problems with Crucial 8gb DDR4 2666mhz
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=9043
Printed Date: 27 Jul 2024 at 4:39pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: AB350 Pro4 problems with Crucial 8gb DDR4 2666mhz
Posted By: almirfiorio
Subject: AB350 Pro4 problems with Crucial 8gb DDR4 2666mhz
Date Posted: 29 Jun 2018 at 9:25am
|
Dear Members im have Asrock B350 Pro 4 When im put two units of Ballistix Sport LT 8GB Single DDR4 2666 MT/s (PC4-21300) DR x8 DIMM 288-Pin Memory - BLS8G4D26BFSC (White) when im use only one unit the machine works fine but when im put the second unit the machine startup and freezes Help me my Bios is 4.70 Thanks Almir |
Replies:
Posted By: datonyb
Date Posted: 29 Jun 2018 at 8:19pm
|
2 sticks should be using slot a2 and b2 reset bios defaults and then test 1 stick in a2 then the other stick in a2 if both fine test slot b2 the same way this should indicate if a stick of ram or slot is bad if everything is okay it would appear you need to manually start setting the ram timings for dual channel ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: almirfiorio
Date Posted: 30 Jun 2018 at 12:03am
Im do that . One stick (one pieces) work Fine in all slots |
datonyb wrote:Posted By: datonyb
Date Posted: 30 Jun 2018 at 9:17am
|
" rel="nofollow - so BOTH sticks used singlely work ok in all slots ? but problem is ONLY when two sticks ? if so reset bios defaults WITH ONE STICK IN A2 ! then flash bios to beta 4.73 or 4.83 and test for stable dual channel mode (two sticks) a2+b2 ------------- [url=https://valid.x86.fr/jpg250] [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: almirfiorio
Date Posted: 03 Jul 2018 at 8:07am
" rel="nofollow - [URL=][/URL]
Im Put 4.73 beta and memory in A2 and b2 I think I found the problem the two memories are of the same brand and same model the first one was already working normally I tested the first in single in the 4 slots, I turned it on and off 4 times and worked normally already the second memory that arrived last week is freeze in single mode :( so the problem is in the memory |