Z370 Fatal1ty Gaming K6 - BIOS A red light...
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=9057
Printed Date: 10 May 2024 at 10:35pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Z370 Fatal1ty Gaming K6 - BIOS A red light...
Posted By: davede
Subject: Z370 Fatal1ty Gaming K6 - BIOS A red light...
Date Posted: 01 Jul 2018 at 9:46pm
|
Hello, Is it possible to turn off the red light that comes from section under chipsets radiator "BIOS A"? I have taken a photo.  This light makes me crazy, because it stays even when my pc is off. How to disable it? I have the same issue with POWER and RESET button on the motherboard. Their lights shine forever... In the past I have used AsRock's board based on Z97 chipset and if I good remember, there was a simple function called "Goodnight LED" which helps to turn all lights off... Please help.
|
Replies:
Posted By: ASRock_TSD
Date Posted: 03 Jul 2018 at 10:12am
|
" rel="nofollow - Dear Davede,
Thank you for choosing ASRock.
The BIOS selection LED and power, reset button LED can be turned off when system shutdown. Please set the deep sleep option to enable, and press F10 to save the configuration. The LED will be turned off when system shutdown. The BIOS path: Advanced > Chipset Configuration > Deep Sleep
Thank you! Yours truly, ASRock TSD |
Posted By: Dida
Date Posted: 15 Oct 2018 at 6:33pm
| " rel="nofollow - Hi ASRock_TSD i have the same light red open in p1.30 like the picture its that normal ? |
Posted By: ASRock_TSD
Date Posted: 16 Oct 2018 at 10:45am
|
Dear Dida, Thank you for choosing ASRock. ASRock Z370 Gaming K6 has two
BIOS ROM chip; the red LED will show which BIOS is in used now. If you want to turn off the
Dual BIOS LED, please update the BIOS to P3.20 and disabled the [Dual BIOS LED]
option at Advanced Chipset Configuration. http://www.asrock.com/mb/Intel/Fatal1ty%20Z370%20Gaming%20K6/index.asp#BIOS" rel="nofollow - http://www.asrock.com/mb/Intel/Fatal1ty%20Z370%20Gaming%20K6/index.asp#BIOS Yours truly, ASRock TSD |
Posted By: Dida
Date Posted: 17 Oct 2018 at 4:02am
thank you ASRock TSD
now I have already tried several temtative of raid with 2x m.2 without success
would you have a simple asctuce to give me for raid two m.2?
my motherboard is ASRock Z370 Extreme4
|
Posted By: ASRock_TSD
Date Posted: 19 Oct 2018 at 10:12am
|
" rel="nofollow - Dear Dida, You can follow the below steps to setup the RAID volume. 1. Press [F2] or [Del] during POST to get into BIOS. 2. Press [F6] to Advanced mode. 3. Select Advanced, Storage Configuration, and set SATA Mode selection from [AHCI] to [Intel RST Premium With Intel Optane System Acceleration (RAID Mode)]. 4. Set Launch Storage OpROM Policy from [Legacy only] to [UEFI only]. 5. Set M2_1 ??RST Pcie Storage Remapping from [Disabled] to [Enabled]. 6. Set M2_2 ??RST Pcie Storage Remapping from [Disabled] to [Enabled]. 7. Press [F10] to save configuration change and get into BIOS again. 8. Select Advanced, Intel(R) Rapid Storage Technology, Create RAID Volume. 9. Key-in a volume name and press <Enter>, or simply press <Enter> to accept the default name 10. Select your desired RAID Level and press <Enter> 11. Select the hard drives to be included in the RAID array and press <Enter> 12. Select a stripe size for the RAID array and press <Enter> 13. Select Create Volume and press <Enter> to start creating the RAID array If you want to install the Windows 10 in RAID volume, please download SATA Floppy Image from ASRock website, and load driver while installing Windows 10. Yours truly, ASRock TSD |
Posted By: Dida
Date Posted: 20 Oct 2018 at 4:06am
|
" rel="nofollow -
thank you for all his reponce his help me a lot if it's not too much to ask I'll just have one last questionI bought this card: Intel wifi 9560NGW Wireless-AC is there an option in the bios to identify or it is not compatible because it does not detect! win 10 full update update intel instaled and not detect the card |
Posted By: Simplis
Date Posted: 21 Oct 2018 at 3:10pm
|
hello. I have question. how I can switch from 1st bios to 2nd bios or from 2nd bios to 1st bios. Thanks. |
Posted By: ASRock_TSD
Date Posted: 23 Oct 2018 at 10:21am
|
Dear Dida, The Intel 9560 Wi-Fi module is CNVi type, which only supports at H370, B360, H310, Z390 chipset. The CNVi Wi-Fi module cannot be used at Z370 chipset. Yours truly, ASRock TSD
|
Posted By: ASRock_TSD
Date Posted: 23 Oct 2018 at 10:22am
|
" rel="nofollow - Dear Simplis, Which model are you using? Yours truly, ASRock TSD
|
Posted By: Simplis
Date Posted: 23 Oct 2018 at 8:48pm
| I use ASRock fatality z370 gaming k6 |