Crash after BIOS update
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=90817
Printed Date: 18 Jul 2025 at 3:34pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Crash after BIOS update
Posted By: Dacioms
Subject: Crash after BIOS update
Date Posted: 17 Jan 2025 at 3:09am
Today I updated the BIOS of my ASROCK Z790 PG motherboard to the version released in January, following all the instructions correctly.The update went as expected until the system, after being updated, asked to give the ok to restart.
After approximately one minute on, the system turned off and now when turned on it stays on for one or two seconds, with the board LED on and then turns off.
The computer was working perfectly before, it is absurd for the company to release a sensitive update like the BIOS without taking responsibility for validating all possible errors.
I'm in desperate need of the computer now, I hope there's a quick solution for this.
|
Replies:
Posted By: Chillout
Date Posted: 19 Jan 2025 at 7:41pm
Updating to 18.02 was a bit more stressful for me too (Z790 Riptide PG).
After update, it took forever to post and then got stuck on the Bios loading screen (hit F2). I was able to get it to work by unplugging PC and hitting the power button a few times to clear out any residual power.
CPU: i9-12900k / 64GB corsair ram (2x32gb)
normally i check the forums before performing a BIOS update which I didnt this time until I started running into problems which seeing this post just about gave me a heart attack until i finally got it working. I hope you get it figured out.
|
Posted By: sxs078
Date Posted: 21 Jan 2025 at 4:00am
|
Have a similar issue on Z890 motherboard with the 2.21.AS03, the computer basically shuts off
|
|