I have been unable to get a video output signal on a new build I just did using the following components:

AsRock AB350 Pro4

AMD A-9600 3.1Ghz

2x 8GB Crucial Ballistix Sport 2400mhz ram

EVGA 500w power supply

All of the assembly I have done so far outside of a case. My issue is that while the computer boots (the CPU and power supply fans spin), it has no video output to a monitor. I have:

• moved each stick of ram to each slot, and have tried each stick of ram 1 at a time in each slot of the motherboard
• re-seated the cpu and cpu cooler
• tried both VGA and HDMI output to a 1080p tv, then VGA, DVI, and HDMI to a 1080p monitor
• reset CMOS using the included jumper
• let the computer run for 20 minutes to see if the first post was taking a long time
• connected usb keyboard and mouse to both usb 2 and 3 ports

In all of these cases, there has been no video output, but the fans have spooled up and remained on, and there have been no motherboard error beeps except when I took out the ram entirely (as you would expect). I feel like I have exhausted all options here. Does anyone have any suggestions?

Thanks

                                                 gpu xfx 580

                                                 viper 16gb 3200mhz

                                                 asrock x370 pro 4

                                                 evga 600w 80 plus psu

                                                 sandisk 240gb ssd

                                                 flashdrive boot for windows 10 64bit