AMD Motherboards - AB350 Pro4 Bios 4.90 - SoC Voltage jumps to 1.300V

Print Page | Close Window

AB350 Pro4 Bios 4.90 - SoC Voltage jumps to 1.300V

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=9159
Printed Date: 22 May 2024 at 6:22pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: AB350 Pro4 Bios 4.90 - SoC Voltage jumps to 1.300V

Posted By: NINEGRAVES
Subject: AB350 Pro4 Bios 4.90 - SoC Voltage jumps to 1.300V
Date Posted: 17 Jul 2018 at 3:08am

" rel="nofollow - Hello ASRock and Users,

just installed 4.90 for the AB350 Pro4 and iam wondering what is up with the SoC voltage - its not fixed anymore but jumping - it takes the hex value set in bios as minimum voltage and then jumps no matter what value is set up to 1.300V every few seconds.

Aint that a little bit much 1.300V for SoC ? As far as iam aware it shouldnt be more than 1.20V for frequent use. Iam worried about the CPU lifespan - the SoC voltage should be fixed voltage like it was in all other bios versions before, not jumping.

Somebody else experiences this behaviour aswell with the new 4.90 bios ?

-------------
ASRock AB350 Pro4 // Ryzen 2200G // 8GB G.Skill Trident Z 3466

Replies:

Posted By: NINEGRAVES
Date Posted: 18 Jul 2018 at 3:47pm

Push

-------------
ASRock AB350 Pro4 // Ryzen 2200G // 8GB G.Skill Trident Z 3466