AB350 Pro4 with 2400g wont boot after OC
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=9203
Printed Date: 21 Jul 2025 at 2:57pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: AB350 Pro4 with 2400g wont boot after OC
Posted By: MarkR
Subject: AB350 Pro4 with 2400g wont boot after OC
Date Posted: 22 Jul 2018 at 4:06am
|
Specs: Ryzen 5 2400g (Latest drivers) AB350 Pro4 BIOS 4.70 1x 8GB corsair vengeance lpx 2400 Asus STRIX RX570 (tried with and without) Corsair 550W PSU The problem is that I can't apply an overclock to the chip without crashing the system. Everything is completely stable without OC. In BIOS when I apply even a modest OC (50MHz) the system restarts and I get a black screen. Fans power on but that's it. I tried both video outputs and even removed my RX 570 to no avail. Same issue is present in Ryzen Master, PC restarts then black screen. The only way to get the PC to boot after this is to reset CMOS with the jumper. Never had this problem with my 1300x even when messing with some higher overclocks. Any solution to this would be much appreciated. There dosen't seem to be much information on the 2400g anywhere.
|
Replies:
Posted By: Cubito
Date Posted: 11 Aug 2018 at 4:36am
" rel="nofollow -
Hi guys, Exactly the same for me here with 2400g and Asrock Fatal1ty AB350 Gaming-ITX/ac, It´s been 3 weeks testing all kind of voltages and clocks and everything is unstable, there are only to setups not crushing: every stock or manually establishing 3600 MHz with 1.25V at the Vcore, everything above that crushs, sometimes i can run atest during 20 min, run CB15, etc... but at the end always crush as you mentioned. I am kind of desperate, i read people overcloacking the same CPU up 3.9-4.0 Is there something we are missing with this APU?, Any help will be apreciated... |
MarkR wrote: