Intel Motherboards - B250M Pro4 no display, not refreshing signal

Print Page | Close Window

B250M Pro4 no display, not refreshing signal

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=9212
Printed Date: 08 Aug 2025 at 9:26am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: B250M Pro4 no display, not refreshing signal

Posted By: Jack_71
Subject: B250M Pro4 no display, not refreshing signal
Date Posted: 23 Jul 2018 at 8:00pm

" rel="nofollow - I have a B250M Pro4 motherboard that will not show any HDMI display when turning on the computer.

I see no motherboard post, but it does go into Windows without the display.

Now if I hard shut down the computer (hold power button for 5 seconds) and restart it, the display will work until I shut it down again and let it sit for a little while.

I am using the onboard graphics with the I5-7500 processor.

It doesn't seem like it is a Windows problem as I can't even get into the UEFI when I first boot up as I can't see anything. But tried it on Windows 10 and 7.

I have the current version of the firmware.

Any setting and or settings that need to be changed in the UEFI to make sure the motherboard refreshes the video signal?

Thanks

Michael

Replies:

Posted By: elinarobin
Date Posted: 24 Jul 2018 at 12:28am

I have already faced acute trouble in case of using B2250M Pro4. Actually, it was unable to provide a good signal strength and display screen as well. You may find a solution from http://https://mailhelp.net/gmail-support/" rel="nofollow - gmail support number to know the actual way.