[X399M Taichi] d0 Error After Updating BIOS
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=9234
Printed Date: 03 May 2024 at 5:41am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: [X399M Taichi] d0 Error After Updating BIOS
Posted By: B0r8X
Subject: [X399M Taichi] d0 Error After Updating BIOS
Date Posted: 25 Jul 2018 at 10:31pm
|
" rel="nofollow - Hi all, i did update my X399M Taichi from Bios Version 1.00 to 3.10. (did updateing first rom v1.00 to v1.10 and after that updateing from v1.10 to v3.10) After the Update i setup the bios from 3,4ghz to 3.8ghz @ 1,375v and activated XMP for RAM. After a restart, Mainboard doesn´t boot and i got the debug error code d0 shown. My system runs perfectly and stable with the same settings on Bios Version 1.00, but not with v3.10. With Bios Version v1.10 it also runs perfectly with the same settings. Maybe an issue in the bios update ? anyone any idea ? My Configuration: -------------------- ASROCK X399M Taichi AMD Threadripper 1950x Enermax TR4 240 Watercooling 4x8GB Corsair Dominator Platinum 3200Mhz Samsung 970 Pro 512GB M.2 SSD 2x EVGA GTX1080 FTW2 HB SLI |
Replies:
Posted By: Streetguru
Date Posted: 26 Jul 2018 at 5:49am
|
My PC is also frozen right now, mouse can't move, 0% on update, A0 code Sure hope it doesn't brick when I try to restart it. *And it bricked itself, just boot loops now, Thanks ASrock. Why did I ever try to update my BIOS...I was on the last Beta BIOS, did it though a flash drive, got me better memory support. **PC is back up and running after using the USB bios flashback and putting it on 1.10 Could just be an issue with 3.10, maybe stick with 1.10 for now https://i.imgur.com/rQ4PBn7.jpg" rel="nofollow - https://i.imgur.com/rQ4PBn7.jpg |
Posted By: lowdog
Date Posted: 26 Jul 2018 at 2:10pm
|
" rel="nofollow - So you guys started in bios and hit F9 load safe defaults then F10 save and exit. Back in bios updated to 1.10 bios and after flash shut down and booted back to bios, hit F9 safe defaults then F10 reboot, back into bios then flash to 3.10 then shut down and reboot back to bios and again load F9 safe defaults then F10 save and exit then back into bios and THEN LOAD your oc settings. Well ????? ------------- X399 Fat Pro Gaming bios 3.10 - TR4 1900X - 64GB G-SKILL TridentZ F4-3200C14Q-64GTZ @ 3133MHz - Vega 64 AIO with EK block - WC Custom loop - 1500W Silverstone PSU - yay |
Posted By: datonyb
Date Posted: 26 Jul 2018 at 7:42pm
|
just to add to above reminder to always flash with stock bios defaults brian (chew) a bit of an amd guru also recommends to use a single stick of ram to flash bios to cut down risk of data corruption ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |