AMD Motherboards - ASRock Fatal1ty X399 High Temperature

Print Page | Close Window

ASRock Fatal1ty X399 High Temperature

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=9236
Printed Date: 19 Jul 2025 at 5:36pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: ASRock Fatal1ty X399 High Temperature

Posted By: gaa
Subject: ASRock Fatal1ty X399 High Temperature
Date Posted: 26 Jul 2018 at 3:17am

" rel="nofollow - I just got an ASRock Fatal1ty X399 Professional Gaming board. For cooling i use Enermax LiqTech TR4 360. After installation i noticed in the Bios temp is 69 to 70 degree.

So i tought the Cooler pump is dead and i replaced it with another one. The result was the same 69-70 degree.

I updated the bios from 2.5 to 2.0 and after that to 2.1 and after that to 3.1. Still the same result.

I have installed the windows and in windows the HWMonitor and CoreTemp show the temps between 30-40 degree and in the same time "F-Stream Tuning" from Asrock shows the temp over 70.

Which one is correct?

If it is just a mb sensore , Would it cause any problem for me in the future?

I ask because i dont want to go to all trouble of replacing the motherboard.

Replies:

Posted By: OceanBlue72
Date Posted: 27 Jul 2018 at 2:48am

Both temps are correct. Tctl or Tctrl is the higher temp (idel 60-70°), which you see in the bios (fan control monitor Tctrl and H/W Monitor CPU temp). This is the lower Tdie temp (idel 30-40°) plus the threadripper offset with 27°.

Marcus

-------------
Taichi X399, Threadripper 2920X, GSkill F4-3200C14Q-64GTZ, RTX 2080TI, Samsung EVO 850 SSDs, BD Drive, WD 4TB HDD, PSU Antec HCP-1000, Windows 10 64Bit