Error Code 62 Taichi (no display)
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=9273
Printed Date: 20 Jul 2025 at 5:55am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Error Code 62 Taichi (no display)
Posted By: Genesisclimber
Subject: Error Code 62 Taichi (no display)
Date Posted: 29 Jul 2018 at 12:24pm
|
https://pcpartpicker.com/list/YpZXnH" rel="nofollow - https://pcpartpicker.com/list/YpZXnH This is my build ^^^, everytime i start up my computer i get this error code 62. I have no display on my monitor. Im not sure what to do. Ive tried reseating the ram, cpu, graphics card, etc. I cant access bios as I have no visual. All my parts are brand new. |
Replies:
Posted By: Reinvented
Date Posted: 29 Jul 2018 at 1:58pm
| " rel="nofollow - Take everything out of the case, and test it bare bones (minimum amount of stuff in there, so 2 sticks of memory, etc). See if it will boot. Error code 62 is GPU. Is it in the top most PCI-e slot? |
Posted By: Genesisclimber
Date Posted: 29 Jul 2018 at 4:56pm
| Correct,the GPU is in the top slot. I will try using only 2 sticks of ram in different configurations tommorrow and let you know what happens, thanks for the reply |
Posted By: kerberos_20
Date Posted: 29 Jul 2018 at 5:51pm
|
" rel="nofollow - is it 62 or b2? b2 will show as lower case b ------------- http://valid.x86.fr/diq4l4" rel="nofollow">  http://www.userbenchmark.com/UserRun/47132492" rel="nofollow - userbenchmark |
Posted By: Genesisclimber
Date Posted: 29 Jul 2018 at 5:53pm
| It was 62 for sure |
Posted By: kerberos_20
Date Posted: 29 Jul 2018 at 6:14pm
|
in that case it is southbridge runtime services (pch drivers), so some device cant be initialised, try to remove every pci-e device (even m.2 drive) also try to put gpu in another slot if that doesnt help, try to use any random gpu so u can get inside bios to flash it if latest bios doesnt help, then try it with disabled CSM (it doesnt use PCH driver) also if latest bios doesnt support your gpu, make sure to report it at https://event.asrock.com/tsd.asp" rel="nofollow - https://event.asrock.com/tsd.asp ------------- http://valid.x86.fr/diq4l4" rel="nofollow"> http://www.userbenchmark.com/UserRun/47132492" rel="nofollow - userbenchmark |
Posted By: datonyb
Date Posted: 29 Jul 2018 at 6:58pm
|
also try another form of cable from gpu to monitor eg. hdmi-display port swap and the psu seems a little on the small side for the price of rest of parts and the demand a titan may place on the system (i mean why skimp on 65 bucks when system was 2500+) ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: Genesisclimber
Date Posted: 30 Jul 2018 at 10:05am
|
Ok I tried turning the system on with just 2 sticks of ram and then the 62 appeared again. Ive taken out everything else I possibly can, I still have no display. Update: I swapped my graphics card to a different slot. It hovered over 62 for a second then stopped on A6. @daytonyb I didnt think i would need more than 650 watts on a power supply because the proposed wattage on pcpart picker was like 100watts less but this is my first build so I wouldnt know any better. It doesnt seem like the power supply is the issue though as far as I can tell. |
Posted By: Genesisclimber
Date Posted: 30 Jul 2018 at 10:09am
| Update: I just looked up and I have access to bios on screen!!! I have no idea what im doing now so going to read the manual. |
Posted By: datonyb
Date Posted: 31 Jul 2018 at 1:49am
|
horay a bios screen all is well the reason i mentioned psu size was more to do with typical system design and that a psu quoted rating is at 50% load eg if a system can pull 400 watts while gaming you would ideally select an 800w psu to keep it running at its best range a titan x and a 2700x plus board and ram and drives are going to suck more than 325watts before even thinking of overclocking just a heads up mate while i was replying to the issue (i would presume the titan x systems out there are more likely on 1000 watt range psu's) ------------- [url=https://valid.x86.fr/jpg250] [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: Genesisclimber
Date Posted: 31 Jul 2018 at 2:17am
|
oh wow I might have to take mine back then and upgrade to the 1000 watt module if that's the case. |
Posted By: datonyb
Date Posted: 31 Jul 2018 at 3:29am
|
i just run your system thru the coolermaster power supply calculator with the titan clocked at 1800 mhz and the ryzen at 4.1 this system will pull 632 watts .............................................. http://www.coolermaster.com/power-supply-calculator/" rel="nofollow - http://www.coolermaster.com/power-supply-calculator/ ------------- [url=https://valid.x86.fr/jpg250] [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: kerberos_20
Date Posted: 31 Jul 2018 at 4:39am
|
in worst case scenario psu will just overheat but that wattage would be usualy when u put some heavy load on it (smt like stress test) usualy gaming isnt hard for both cpu/gpu ------------- http://valid.x86.fr/diq4l4" rel="nofollow"> http://www.userbenchmark.com/UserRun/47132492" rel="nofollow - userbenchmark |
Posted By: datonyb
Date Posted: 31 Jul 2018 at 8:55pm
|
you miss the point kerberos im not saying it will prevent booting im saying for a new build costing over 2000 dollers the design is lacking a high enough psu unit for typical power draw to remain in its comfort zone as for effects of pulling too much power close to the limit than stability can actually come into effect for the system with random crashing etc ,even down to jet turbine noise from the psu fan trying to keep it cool, hence my suggestion that the psu was bought a bit on the small side ------------- [url=https://valid.x86.fr/jpg250] [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: Genesisclimber
Date Posted: 01 Aug 2018 at 9:07am
|
" rel="nofollow - Ok I have a new question, so I installed Fedora onto my computer but every time I try to boot it says sd 3:0:0:0: [sda] no caching mode page found sd 3:0:0:0: [sda] assuming drive cache: write through sp4100-tco sp4100-tco: 1/0 address 0x0xd6 already in use kvm: disabled by bios kvm: disabled by bios this displays for like half 2 seconds and then the signal goes out...and then I have to restart my mobo and the loop continues unless I go to the bios screen.. Ive been troubleshooting since I last posted here, and Ive tried researching online and can't figure out what to do. Any ideas? PS: I went and returned my 650PSU and got the 1000Watt one |