Print Page | Close Window

Resolution 800x600

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=93075
Printed Date: 03 Jun 2025 at 4:02pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: Resolution 800x600
Posted By: LuckyClock
Subject: Resolution 800x600
Date Posted: 28 Jan 2025 at 9:51pm
Hello, a strange situation on a new PC: when installing Windows, in safe mode and in WinPE, the resolution is 800x600, and there is no way to change it.
And on the old PC (Z97, i7, DDR3, video card, power supply and monitor are the same), when installing Windows, everything was not so big, and in safe mode, WinPE could change the resolution.

I would like to know if I am doing something wrong or if this is how it was intended?



Replies:
Posted By: NDRE28
Date Posted: 29 Jan 2025 at 2:19pm
Originally posted by LuckyClock LuckyClock wrote:

Hello, a strange situation on a new PC: when installing Windows, in safe mode and in WinPE, the resolution is 800x600, and there is no way to change it.
And on the old PC (Z97, i7, DDR3, video card, power supply and monitor are the same), when installing Windows, everything was not so big, and in safe mode, WinPE could change the resolution.

I would like to know if I am doing something wrong or if this is how it was intended?


Hi!

As you know, certain menus, like the BIOS menu, for instance, have a lower resolution.

Question:
Why are you in Safe Mode, and in WinPE?


Posted By: LuckyClock
Date Posted: 29 Jan 2025 at 3:28pm
Originally posted by NDRE28 NDRE28 wrote:

Originally posted by LuckyClock LuckyClock wrote:

Hello, a strange situation on a new PC: when installing Windows, in safe mode and in WinPE, the resolution is 800x600, and there is no way to change it.
And on the old PC (Z97, i7, DDR3, video card, power supply and monitor are the same), when installing Windows, everything was not so big, and in safe mode, WinPE could change the resolution.

I would like to know if I am doing something wrong or if this is how it was intended?


Hi!

As you know, certain menus, like the BIOS menu, for instance, have a lower resolution.

Question:
Why are you in Safe Mode, and in WinPE?


Hi!
It's just strange that there's no such resolution problem on an older PC, and by the way, in bios the resolution is normal and clear. As for safe mode, WinPE, Windows without drivers ??I ran them to check, everywhere 800x600 without the ability to change the resolution, at the same time on the old PC it was possible to increase the resolution.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net