Print Page | Close Window

Win 10 Install x399 Raid Problem

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=9322
Printed Date: 06 Dec 2024 at 3:30am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: Win 10 Install x399 Raid Problem
Posted By: jbmerrill
Subject: Win 10 Install x399 Raid Problem
Date Posted: 02 Aug 2018 at 12:59am
Hi,

I have two raid arrays (1 is the Asrock Ultra Quad m.2 adapter) that I would like to do a clean install of windows 10 on, but cannot because when I select a partition (or even an entire drive), I get errors and the install fails. The farthest I have gotten is after selecting a partition, I get the 'copying files' screen, and after a while, the error:

Windows has detected that the EFI system partition is formatted as NTFS. Format it as Fat32 and restart the installation.   This is bogus because I have verified and explicitly formatted it as Fat32.

There are other errors such as cannot be installed, check your media. Also, cannot create or locate a partition, and perhaps another that I don't remember. The check your media had a specific error code, but I don't know that code at the time of writing this post.

I have tried loading both the sata_raid, and nvme_raid drivers, and they show disks and partitions available in the Windows installer.

Any assistance would be appreciated.

B.

-------------
X399 Pro Gaming, 2990wx Threadripper,128GB G.Skill RGB 3200,EVGA 1200 P2,EVGA GTX 1080 Ti x 2 SLI, Enermax Liqtech 360mm,Samsung 970 EVO/960 Pro/850 EVOs, Toshiba x300 HDDs, Thermaltake Chaser MK-1



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net