Z370 Gaming K6: Problem Using USB 3 19-Pin Header
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=9392
Printed Date: 17 May 2024 at 2:26pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Z370 Gaming K6: Problem Using USB 3 19-Pin Header
Posted By: theinfinitypoint
Subject: Z370 Gaming K6: Problem Using USB 3 19-Pin Header
Date Posted: 10 Aug 2018 at 11:31pm
|
" rel="nofollow - I am having an issue using a memory card reader attached to the 19-pin header on the motherboard. I have 2 USB 3 19-pin headers, one is being used for the front panel, and the other is connected to a card reader. I know the card reader works, at least on another motherboard shortly before this. The card reader has 1 USB 3 Type A port which works when I plug in a USB drive. The other header which connects to the front panel also works when I plug in a USB stick. However for both headers (front panel and card reader) when I plug in the USB drive, Windows 10 Pro x64 complains that I can plug it into a USB 3 port to run faster, even though it is plugged into a USB 3 port. Furthermore, the card reader portion of the card reader does not work at all; Windows does not see anything when I plug in a card (confirmed with multiple cards). I should also add that when I first booted into Windows I noticed it created 5 different drives with letters, which matches the number of memory slots on my reader. However I didn't notice until a little bit later that all of them disappeared, and after I had went through and installed all the drivers from the motherboard's CD. I have tried a couple of things to try and fix this. I enabled XHCI handoff in the BIOS (updated to P3.10), and pretty much anything else that could be enabled related to USB. I also tried uninstalling the ASMedia drivers and allowing Windows to install its own drivers, all of which had no effect. Has anyone else experienced a similar issue? Or does anyone have any other suggestions to try? Much appreciated.
|
Replies:
Posted By: Dmytro_o_o
Date Posted: 11 Aug 2018 at 1:50am
Maybe, installing Asmedia USB 3.0/3.1 XHCI driver ver:1.16.38.1 will help  (https://www.asrock.com/mb/Intel/Fatal1ty%20Z270%20Gaming%20K6/index.us.asp#Download). P.S. Don`t you have any driver-CD with your card reader? ------------- MB:ASRock Z370 Pro4 CPU:i5 8600K RAM:16GB GPU:GTX 1070Ti |
Posted By: theinfinitypoint
Date Posted: 13 Aug 2018 at 7:07am
|
" rel="nofollow - Yeah installing the XHCI driver was the first thing I did after I booted into Win 10 the first time lol. I think I've figured it out. For some reason Win 10 keeps trying to install a driver for this device and when it does install some driver, it causes the card reader to work (the reader does not have its own drivers). So I've gotten it to work by uninstalling the (failed) driver installation. Is there any way to permanently disable installing drivers *for that device only*? I'll post a screenshot of the device manager if I'm able.  |