Print Page | Close Window

3 Beeps on Reboot

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=9413
Printed Date: 29 Mar 2024 at 1:54pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: 3 Beeps on Reboot
Posted By: wussery
Subject: 3 Beeps on Reboot
Date Posted: 14 Aug 2018 at 10:16am
" rel="nofollow - I am getting three beeps from my motherboard (ASRock AB350 Gaming-ITX/ac) when I reboot it. It goes through about 4-5 cycles of this where the fans start and stop before it will POST. Can someone tell what I need to check to resolve this issue?


-------------
MOBO: ASRock AB350 Gaming-ITX/ac
CPU: Ryzen 5 1600
RAM: G.SKILL TridentZ Series 16GB DDR4 3200
GPU: EVGA GeForce GTX 1060 SC
PSU: EVGA 750 B3
Cooler: Cryorig C7
Boot Disk: SAMSUNG 850 PRO 256GB SSD



Replies:
Posted By: wussery
Date Posted: 14 Aug 2018 at 10:44am
" rel="nofollow - I believe I resolved the issue by turning off AM4 Advanced Boot Training. I had it set to Auto. Was this a bad move on my part or should I leave it turned off as this has resolved my beep and fan issue at boot startup?


-------------
MOBO: ASRock AB350 Gaming-ITX/ac
CPU: Ryzen 5 1600
RAM: G.SKILL TridentZ Series 16GB DDR4 3200
GPU: EVGA GeForce GTX 1060 SC
PSU: EVGA 750 B3
Cooler: Cryorig C7
Boot Disk: SAMSUNG 850 PRO 256GB SSD


Posted By: datonyb
Date Posted: 14 Aug 2018 at 6:34pm
" rel="nofollow -
well its upto you but those 3 beeps and reboot were telling you its not happy with its settings (probably the ram xmp at 3200) and its now set them to 2133 and all stock bios settings
so ......are you happy buying 3200 ram and using it at 2133 ?


-------------
[url=https://valid.x86.fr/jpg250][/url]

3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold


Posted By: wussery
Date Posted: 14 Aug 2018 at 11:12pm
I'll take a look at my settings after boot up and see what they are set to. Bottom line I need my PC to be stable and if its complaining about the speeds for my ram chips, then I need to listen.


-------------
MOBO: ASRock AB350 Gaming-ITX/ac
CPU: Ryzen 5 1600
RAM: G.SKILL TridentZ Series 16GB DDR4 3200
GPU: EVGA GeForce GTX 1060 SC
PSU: EVGA 750 B3
Cooler: Cryorig C7
Boot Disk: SAMSUNG 850 PRO 256GB SSD


Posted By: datonyb
Date Posted: 15 Aug 2018 at 6:07am
" rel="nofollow -
the usual way is too manually adjust the timings and settings for ram and still run 3200 or even more

its not too complicated when you use the ryzen dram calculator

the problem is the inability of amd/asrock bios to use the xmp settings based on intel

or option b is is to set the ram to 2666/2933 after loading xmp (the lazy way), it should handle that ok


edit

are your trident z 3200 cl14 cl15 or cl16 ?

im guessing cl16 and not using the samsung b dies

if they are indeed cl16 you might still be left with no other option but to select 2666 or 2933

if they are cl14 or 15 then you should with a little effort get them solid at 3200


-------------
[url=https://valid.x86.fr/jpg250][/url]

3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold


Posted By: gizmic
Date Posted: 15 Aug 2018 at 12:18pm
as datonyb said best first find out what chips your kits are using. You can find out with either googling the serial or loading Thaiphoon

lets just hope he's on not the CL16 kits those are a mix of sammy D/E & hynix A/M dies


-------------


Posted By: wussery
Date Posted: 16 Aug 2018 at 1:27am
Here are the specs from the Amazon page for the chips that I purchased:

  • DDR4 3200 (PC4 25600)
  • Timing 16-18-18-38
  • CAS Latency 16
  • Voltage 1.35V


-------------
MOBO: ASRock AB350 Gaming-ITX/ac
CPU: Ryzen 5 1600
RAM: G.SKILL TridentZ Series 16GB DDR4 3200
GPU: EVGA GeForce GTX 1060 SC
PSU: EVGA 750 B3
Cooler: Cryorig C7
Boot Disk: SAMSUNG 850 PRO 256GB SSD


Posted By: datonyb
Date Posted: 16 Aug 2018 at 5:15am
yep thats the cl16 stuff thats sold a shedload due to the half informed rumour that gskill 3200 is ryzen friendly
its the 3200
15/15/15/ or 14/14/14 thats the b dies

you can maybe with effort get the 3200 cl16 working with the ryzen dram calculator
or settle for 2933 or 2666


-------------
[url=https://valid.x86.fr/jpg250][/url]

3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net