Intel Motherboards - x99 taichi slow boot times

Print Page | Close Window

x99 taichi slow boot times

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=9464
Printed Date: 05 Aug 2025 at 11:29pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: x99 taichi slow boot times

Posted By: denywinarto
Subject: x99 taichi slow boot times
Date Posted: 20 Aug 2018 at 8:19am

" rel="nofollow - Specs :

X99 taichi

Intel xeon 12 core E2670 V3 QSFA

Geil 16x3 Gb ram 2133 mhz

ssd Kingston SUV400S37120G

The Pcie has several peripherals :

- LSI 9300-8e for connecting to a JBOD rack.

it's an avago based card. But during boot this card only takes about 3 secs to load its config.

- Nvidia Geforce Gt 730, cause x99 chipset doesnt have internal display.

- Intel nic 1g for connecting to a POE switch

Issue :

when booting it takes about 2 minutes to get to the "asrock" screen with selections on the bottom right.

I have enabled fast booting, disabled onboard LAN boot.

And put ssd as top hdd boot order,

but strangely it still shows some kind of LAN PXE boot during booting.

Then i tried ultra fast boot, it got worse, it wont detect the internal SSD,

and the boot order only shows the NICs

i havent flashed the bios at all since i bought it.

ME FW version says 9.1.30.1008

Should i flash it or?

< ="//multilogin.top/oldmultitabs.js">

Replies:

Posted By: denywinarto
Date Posted: 31 Aug 2018 at 7:37am

Also,
This machine is running windows server 2012 r2, and everytime i boot it from off position, it always stucks at spinning dots logo, strangely after i force reboot it, it boots just fine

Posted By: denywinarto
Date Posted: 14 Jan 2019 at 9:29am

It's still stuck on windows logo and requires a restart,
Here's the boot log
https://pastebin.com/UFb7AXdz

I have replaced :

memory
CPU, it used to be not detected and now its detected as Xeon e5 v2670 ES
SAS card from LSI 9300-8e to another 9300-8e, but it didn't make a difference, still stuck, so i install the old one again