Z370 Gaming K6 M.2 SATA RAID0 Issue
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=9519
Printed Date: 26 Jun 2024 at 9:44pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Z370 Gaming K6 M.2 SATA RAID0 Issue
Posted By: roy3306
Subject: Z370 Gaming K6 M.2 SATA RAID0 Issue
Date Posted: 26 Aug 2018 at 12:12am
" rel="nofollow - Does this board support M.2 SATA RAID? I'm having issues with my 2 Samsung 860 Evo M.2 drives working in RAID 0.
I can create the RAID array with no problems but when I install Windows 10, it stops detecting one of the drives and the array fails. When I reboot the drive in M.2_1 is not detected by the BIOS and the RAID array is listed as failed in the RST bios menu. I've tried legacy mode as well with the same result.
Latest BIOS is installed, latest firmware installed on the drives. Clean Windows 10 install.
Any help would be appreciated. I'm thinking I got a faulty drive but I'm not sure.
|
Replies:
Posted By: RLGL
Date Posted: 26 Aug 2018 at 4:12am
" rel="nofollow - Are you using the SATA PORTS? they share with the M.2 slots. Check your manual for the shares.
-------------
Asrock Z370 Gaming K6,Intel i7 8700K,
Asrock x570 Taichi
|
Posted By: roy3306
Date Posted: 26 Aug 2018 at 5:23am
|
I'm using an ASMEDIA port for my optical drive. No other SATA ports are being used.
|
Posted By: klimbo13
Date Posted: 27 Aug 2018 at 1:49pm
|
I've tried to just avoid the driver part, but as soon as I set up the RAID 0 and exit, the volume gets lost when I re-enter the BIOS. I have a Windows USB recovery media that I can use to install Windows on the RAID volume, but when I boot to the USB and try to install Windows, it doesn't detect the since volume at all. I'm not sure what else to try.
|
Posted By: roy3306
Date Posted: 28 Aug 2018 at 5:35pm
|