x470 DrDebug 24
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=9550
Printed Date: 18 Jul 2025 at 5:16pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: x470 DrDebug 24
Posted By: DrLight
Subject: x470 DrDebug 24
Date Posted: 28 Aug 2018 at 7:13pm
|
" rel="nofollow - I have a Fatal1ty x470 with a AMD x2700x cpu and 2 sticks of GSkill Trident 8GB F4 3200C160D 16GTZR ram. I have a 1TB M2 970 EVO SSD and a 6TB WD HDD. The GPU is an EVGA 1080ti with 8GB of memory. I Keep getting a DrDebug error of 24, which relates to memory problems. However the Motherboard screen states that the 2 sticks of 8GB ram are there and are located in slots A2 and B2. Can anyone help me with this problem? ------------- One by one the penguins steal my sanity |
Replies:
Posted By: kerberos_20
Date Posted: 28 Aug 2018 at 9:15pm
|
try with single stick in A2 ------------- http://valid.x86.fr/diq4l4" rel="nofollow">  http://www.userbenchmark.com/UserRun/47132492" rel="nofollow - userbenchmark |
Posted By: DrLight
Date Posted: 28 Aug 2018 at 9:33pm
|
" rel="nofollow - tried with single stick of ram in slot A2, switched sticks and same result. Removed cmos battery and left for 5 minutes prior to single ram stick test. Board is only a couple of months old, should I put in pport tciket? ------------- One by one the penguins steal my sanity |
Posted By: kschendel
Date Posted: 29 Aug 2018 at 2:31am
|
" rel="nofollow - At what point do you see this? (sitting in BIOS, during normal operation, ???) Are there any other symptoms? My Taichi Dr.Debug will occasionally show memory-related codes while in some of the BIOS screens, but they go away when I continue the boot into the OS. |
Posted By: DrLight
Date Posted: 29 Aug 2018 at 5:14pm
|
Its after the PC boots up completely. During boot I see a variety of codes, but the 24 stays there ------------- One by one the penguins steal my sanity |
Posted By: gizmic
Date Posted: 29 Aug 2018 at 6:15pm
|
i kinda remember the first time i powered up my system it went all matrix on me for a good 1 minute dont remember on what number it stays on but it eventually boots ------------- 
|
Posted By: DrLight
Date Posted: 29 Aug 2018 at 6:29pm
|
No trouble booting the machine. It boots fine - I just get the DrDebug code 24 after it boots ------------- One by one the penguins steal my sanity |
Posted By: kerberos_20
Date Posted: 29 Aug 2018 at 8:25pm
|
once u boot, u shouldnt see anything on dr debug unless u have enabled drdebug temperatures ------------- http://valid.x86.fr/diq4l4" rel="nofollow"> http://www.userbenchmark.com/UserRun/47132492" rel="nofollow - userbenchmark |
Posted By: datonyb
Date Posted: 30 Aug 2018 at 12:26am
|
" rel="nofollow - i was going to say this isnt displaying temp is it ? ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: DrLight
Date Posted: 30 Aug 2018 at 5:29pm
|
" rel="nofollow - I think it might be. Does anyone know how to turn that setting off or is it an all or nothing thing with DrDebug? Thanks for all the help
------------- One by one the penguins steal my sanity |
Posted By: kschendel
Date Posted: 30 Aug 2018 at 10:23pm
|
It's in the BIOS somewhere. You can set it to display various temps or you can turn it off after boot. I forget where the setting is, you'll have to treasure-hunt for it. |
Posted By: DrLight
Date Posted: 31 Aug 2018 at 8:57pm
|
Thanks will do. again thatnks to all who helped out ------------- One by one the penguins steal my sanity |