X370 Gaming X 4.90 Bios
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=9574
Printed Date: 22 Jul 2025 at 4:18am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X370 Gaming X 4.90 Bios
Posted By: chubalz
Subject: X370 Gaming X 4.90 Bios
Date Posted: 30 Aug 2018 at 10:09pm
|
https://www.asrock.com/mb/AMD/Fatal1ty%20X370%20Gaming%20X/index.asp#BIOS" rel="nofollow - https://www.asrock.com/mb/AMD/Fatal1ty%20X370%20Gaming%20X/index.asp#BIOS " rel="nofollow - is it stable?
See my signature of all my specs ------------- Ryzen 5 1600 3.80ghz @1.3375v Asrock X370 Gaming X 5.20 Bios CM MA610P Aorus Xtreme Gtx1080ti Gskill Trident Z RGB F4-300016D-16GTZR @2800mhz SamsungEvo 250 2Tb Firecuda 1Tb WDBlack Corsair RM650X |
Replies:
Posted By: chubalz
Date Posted: 02 Sep 2018 at 9:59pm
|
up ------------- Ryzen 5 1600 3.80ghz @1.3375v Asrock X370 Gaming X 5.20 Bios CM MA610P Aorus Xtreme Gtx1080ti Gskill Trident Z RGB F4-300016D-16GTZR @2800mhz SamsungEvo 250 2Tb Firecuda 1Tb WDBlack Corsair RM650X |
Posted By: kerberos_20
Date Posted: 03 Sep 2018 at 2:53am
|
im on it atm, so far it works ------------- http://valid.x86.fr/diq4l4" rel="nofollow">  http://www.userbenchmark.com/UserRun/47132492" rel="nofollow - userbenchmark |
Posted By: schimiro
Date Posted: 03 Sep 2018 at 2:58am
|
" rel="nofollow - tried it since thursday...there is a new option in the bios where you can set manually the soc voltage...it retains whatever value you insert after saving the bios setting...but doesnt seems to be working if you check the hwinfo tab in the bios ?????? |
Posted By: kerberos_20
Date Posted: 03 Sep 2018 at 12:33pm
|
hmm dunno, i dont overvolt soc, its stable with default volts ------------- http://valid.x86.fr/diq4l4" rel="nofollow"> http://www.userbenchmark.com/UserRun/47132492" rel="nofollow - userbenchmark |
Posted By: Mustmurder
Date Posted: 03 Sep 2018 at 3:17pm
| " rel="nofollow - Can ANYONE confirm if this reduces RAM red/writes with Asrock manual OC like 4.70, 4.80? |
Posted By: kerberos_20
Date Posted: 03 Sep 2018 at 4:11pm
|
here u go, not sure if that what u asked for non overclocked cpu:  p0 state set to 4.1GHz (a4 value)  p0+p1 set to 4.1GHz and p2 set to 2.2GHz  cpu seems to get locked to p2 state and cannot get out of it as for your question: reply : bandwith is fine, tho i cant reduce some latencies as i used to with lower bios revisions (u can see that low copy bandwith) ------------- http://valid.x86.fr/diq4l4" rel="nofollow"> http://www.userbenchmark.com/UserRun/47132492" rel="nofollow - userbenchmark |
Posted By: kerberos_20
Date Posted: 03 Sep 2018 at 4:19pm
 forgot about asrock overclock setting (4100 @ 1.375v)
------------- http://valid.x86.fr/diq4l4" rel="nofollow"> http://www.userbenchmark.com/UserRun/47132492" rel="nofollow - userbenchmark |
Posted By: TeroZ
Date Posted: 03 Sep 2018 at 4:36pm
| I've noticed the Ultra Fast Boot is finally working with this BIOS version. Sadly my 2600x still couldn't run memory at 3200C14 without occasional crashing. |