X470 No more LED
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=9617
Printed Date: 22 Jul 2025 at 8:34am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X470 No more LED
Posted By: Nico999777
Subject: X470 No more LED
Date Posted: 05 Sep 2018 at 4:38am
|
I have a problem with my new motherboard x470 master sli. Somehow the LED Light isn't working anymore..I installed the rbg software from asrock and now I can't turn it on anymore. I installed windows again and tried to turn it on trough the bios. |
Replies:
Posted By: kerberos_20
Date Posted: 05 Sep 2018 at 12:28pm
|
" rel="nofollow - can u post picture of your bios screen with your rgb settings? ------------- http://valid.x86.fr/diq4l4" rel="nofollow">  http://www.userbenchmark.com/UserRun/47132492" rel="nofollow - userbenchmark |
Posted By: Nico999777
Date Posted: 05 Sep 2018 at 1:24pm
 Can I somehow reset the whole Mai board or is there cable that could be loosen? |
Posted By: fnordie
Date Posted: 05 Sep 2018 at 2:54pm
|
" rel="nofollow - on mine the red and green channels switched one day? if i set full red its GREEN if i set full green its RED funny thing is this are the onboard LEDs, not a wrong wired strip.. was also wondering if i can "reset" the led stuff you can reset the whole motherboard bios to "factory" setting with a cmos clear. its a jumper you need to short for aa few seconds (when powered off) its in the manual
|
Posted By: Nico999777
Date Posted: 05 Sep 2018 at 3:51pm
| " rel="nofollow - Yes mine are the onboard led too.. So did it work for u? I will try it when I get home |
Posted By: Nico999777
Date Posted: 06 Sep 2018 at 4:10pm
| It didn't work. Now my keyboard and mouse isn't working in the uefi :/ |
Posted By: Xaltar
Date Posted: 06 Sep 2018 at 4:46pm
|
Open a support ticket with ASRock here: https://event.asrock.com/tsd.asp" rel="nofollow - https://event.asrock.com/tsd.asp List the details of your issues and they will be able to help you. ------------- 
|
Posted By: Strafford
Date Posted: 25 Sep 2018 at 6:45am
|
It happened to me 5minutes after installing windows and that rgb software. The first time you open the software it flashes the rgb controller, but unfortunately it flashes to an older rom version causing the controller to not work anymore. So you have to reflash the ROM on the controller back and it will flash like crazy then start working. |
Posted By: fnordie
Date Posted: 25 Sep 2018 at 9:10pm
| " rel="nofollow - where can i get this rgb controller firmware? |