Print Page | Close Window

z370 Raid 0 windows install issues

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=9659
Printed Date: 10 Aug 2025 at 9:19pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: z370 Raid 0 windows install issues
Posted By: kscltu
Subject: z370 Raid 0 windows install issues
Date Posted: 11 Sep 2018 at 5:18am
" rel="nofollow -
Hello,

i have z370 Taichi and i bought 2x 500Gb Samsung Evo 960. I have installed Raid 0 per manual for PCIE, i can see the logical 1 drive during the windows installation when i installed the drivers, but when i want to choose the drive, i get error, that windows cannot be installed on this drive. I tried to install windows 10 home 64bit.

Have anyone had a similar issues please? Let me know if more details are required.

thank you very much


Replies:
Posted By: ASRock_TSD
Date Posted: 11 Sep 2018 at 11:46am
" rel="nofollow -
Dear Kscltu,

Thank you for choosing ASRock.

Regarding your case, we have tested at our lab; the Windows 10 can be installed properly.
System configuration:
CPU: i7-8700k
MB: Z370 Taichi BIOS P3.10
SSD: Samsung 960 EVO 250GB x2 (RAID 0)

Please follow the steps to setup the RAID volume.
1. Press "F2"or "Del" during POST to get into BIOS.
2. Press "F6" to Advanced mode.
3. Select Advanced, Storage Configuration, and set SATA Mode selection from "AHCI" to "Intel RST Premium With Intel Optane System Acceleration (RAID Mode)"
4. Set Launch Storage OpROM Policy from "Legacy only" to "UEFI only"
5. Set M2_1 "RST Pcie Storage Remapping from "Disabled" to "Enabled"
6. Set M2_2 "RST Pcie Storage Remapping from "Disabled" to "Enabled"
7. Press "F10" to save configuration change and get into BIOS again.
8. Select Advanced, Intel(R) Rapid Storage Technology, Create RAID Volume.
9. Key-in a volume name and press <Enter>, or simply press <Enter> to accept the default name
10. Select your desired RAID Level and press <Enter>
11. Select the hard drives to be included in the RAID array and press <Enter>
12. Select a stripe size for the RAID array and press <Enter>
13. Select Create Volume and press <Enter> to start creating the RAID array
14. Install the Windows 10 at UEFI mode
15. Please download the SATA Floppy Image from below link. And load driver while installing Windows 10.
http://www.asrock.com/mb/Intel/Z370%20Taichi/index.asp#Download

Thank you!
Yours truly,
ASRock TSD


Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net