x470 Taichi, XFR/PBO and CPU voltage offset
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=9675
Printed Date: 27 Dec 2024 at 5:47am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: x470 Taichi, XFR/PBO and CPU voltage offset
Posted By: akirabbq
Subject: x470 Taichi, XFR/PBO and CPU voltage offset
Date Posted: 13 Sep 2018 at 6:30pm
|
" rel="nofollow - Hi there. I've tried BIOS 1.50, 1.52 or any earlier firmwares, if PBO is enabled under AMD advanced menu, the CPU voltage offset will become -0.1V and the value is not savable. The voltage offset will revert to -0.1V after next reboot. Any help? Thank you. |
Replies:
Posted By: Malakai
Date Posted: 28 Nov 2018 at 9:44am
|
I have the same problem. I get wicked performance with -0.075 offset and PBO enabled, my 2700x boosts up to 4.15 GHz on all cores under full load stable. The max core voltage under that full load is 1.444v which is excellent. It still ramps down to .800v when idle, best of both worlds really. After I restart or boot the computer cold after shutting down the offset setting has gone back to -0.100v which prevents Windows from booting. I have to go into setup every time I start or restart the computer and set the offset back to -0.075v again and then save and exit to get the computer to boot. It just doesn't hold the setting. Very frustrating because this is such a good setup if it would just hold the setting. I imagine a BIOS update will fix it in the future but who knows when that might be... |
Posted By: gizmic
Date Posted: 28 Nov 2018 at 10:18am
|
this is fixed with betabios 1.62 just wait for it to show up in the official channel or get it here at your own risk https://www.jzelectronic.de/jz2/index.php ------------- 
|
Posted By: Malakai
Date Posted: 28 Nov 2018 at 10:34am
| Thank you for giving us the heads up, I'll keep an eye out for when it becomes an official update. |
Posted By: J Z
Date Posted: 28 Nov 2018 at 3:48pm
|
https://www.jzelectronic.de/jz2/forum.php?act=38011 ------------- Kind Regards, JZ https://shop.JZelectronic.de - Der Shop mit ausgesuchter ASRock Profi Hardware https://www.facebook.com/asrock.de |
Posted By: Malakai
Date Posted: 28 Nov 2018 at 5:09pm
|
Thank you for the forum link, I was going to look for it later today. Vielen Dank für den Forum-Link, ich würde ihn später heute suchen. Is this BIOS tested well? Are there any issues I'm likely to encounter if I flash it on my motherboard? Where does it come from? Ist das BIOS gut getestet? Gibt es Probleme, auf die ich möglicherweise sto?e, wenn ich sie auf meinem Motherboard speichere? Woher kommt das? |
Posted By: J Z
Date Posted: 28 Nov 2018 at 5:58pm
|
No problems with my customers and forum users. BIOS is good. BIOS comes from the ASRock BIOS department according to my information  ------------- Kind Regards, JZ https://shop.JZelectronic.de - Der Shop mit ausgesuchter ASRock Profi Hardware https://www.facebook.com/asrock.de |
Posted By: Malakai
Date Posted: 29 Nov 2018 at 12:59pm
|
I flashed the BIOS v1.62 and I'm using it now. Everything works as expected so far. Most importantly it retains my PBO and under volt settings after restart or shut down. Many thanks. Now I need to dive into some LLC and P-state tuning. |
Posted By: paologab
Date Posted: 29 Nov 2018 at 6:41pm
|
Hi, same here. 1.62 working, I put voltage offset -0,8 and both LLC at level 3. Hope to solve some hardware random freezes with XFR/PBO enabled and kernel 4.19.2. ------------- AMD Ryzen 7 2700X w/Wraith prism x470 Taichi bios 3.50 16gb HX432C16PB3K2/16 (hynix H5AN8G8NCJR-UHC) M.2 970 EVO, SATA SSD, 2 SATA HDD AMD Radeon RX 580 8G OC Linux Kernel 5.4 Manjaro Stable XFCE |
Posted By: akirabbq
Date Posted: 30 Nov 2018 at 10:28am
Thanks for posting the beta BIOS on your site, much appreciated. Now the board works like it should be after several months of purchase. 2700x, PBO/XFR on, cpu offset -0.8V, 102 BCLK, RAM 3200 CL14, single core boosts to 4.43Ghz and all core stable at 4.18 under a custom water loop. Cinebench reaches 1900 easily. |
J Z wrote:Posted By: paologab
Date Posted: 30 Nov 2018 at 3:25pm
|
Hi, which tdie temp do you have under stress? I get easily over 80??With stress-ng --matrix 0 ------------- AMD Ryzen 7 2700X w/Wraith prism x470 Taichi bios 3.50 16gb HX432C16PB3K2/16 (hynix H5AN8G8NCJR-UHC) M.2 970 EVO, SATA SSD, 2 SATA HDD AMD Radeon RX 580 8G OC Linux Kernel 5.4 Manjaro Stable XFCE |
Posted By: paologab
Date Posted: 30 Nov 2018 at 3:58pm
|
I realized that I'm ot. Sorry for that. Pls answer in pm ------------- AMD Ryzen 7 2700X w/Wraith prism x470 Taichi bios 3.50 16gb HX432C16PB3K2/16 (hynix H5AN8G8NCJR-UHC) M.2 970 EVO, SATA SSD, 2 SATA HDD AMD Radeon RX 580 8G OC Linux Kernel 5.4 Manjaro Stable XFCE |
Posted By: Malakai
Date Posted: 01 Dec 2018 at 4:28am
|
Tdie = 70 degrees under all core 100% load, ambient temp is 27 degrees My latest results: 2700x, PBO/XFR on, cpu offset -0.075v, 101 BCLK, RAM 3500 CL16, single core boosts to 4.39Ghz and all core stable at 4.14Ghz under a Corsair H150i PRO balanced fan and pump profile. Cinebench multi 1865, single 177. I'm aiming to push the BCLK to around 104, I might have to drop the RAM back to 3333 base though for stability. Need to get single core score up. My ultimate goal is 1900 multi and 190 single. |
Posted By: J Z
Date Posted: 01 Dec 2018 at 4:57pm
|
Hello guys, is the BIOS ok now ? ------------- Kind Regards, JZ https://shop.JZelectronic.de - Der Shop mit ausgesuchter ASRock Profi Hardware https://www.facebook.com/asrock.de |
Posted By: Malakai
Date Posted: 01 Dec 2018 at 6:02pm
| Yes it is working just fine on my system. |
Posted By: paologab
Date Posted: 02 Dec 2018 at 6:37pm
|
Hi, same here. All is ok. No more freezes. Even with CPU + GPU heavy stress, max XMP ram profile, XFR&PBO enabled. Now I'm looking for balanced fan tuning. ------------- AMD Ryzen 7 2700X w/Wraith prism x470 Taichi bios 3.50 16gb HX432C16PB3K2/16 (hynix H5AN8G8NCJR-UHC) M.2 970 EVO, SATA SSD, 2 SATA HDD AMD Radeon RX 580 8G OC Linux Kernel 5.4 Manjaro Stable XFCE |