X370 Pro4 unable to XMP, do I need B die?
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=9687
Printed Date: 22 Jul 2025 at 9:20am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X370 Pro4 unable to XMP, do I need B die?
Posted By: sdtech
Subject: X370 Pro4 unable to XMP, do I need B die?
Date Posted: 14 Sep 2018 at 11:51pm
| " rel="nofollow - [URL=][/URL]I have BIOS 5.0 and I'm unable to run my G.Skill Ripjaws V 3200 hynix RAM at any XMP setting above 2133 without random memory crashes. I've tried 1.4v RAM voltage which didn't help, the BIOS has no LLC or SoC setting, but SoC is 1.1v in Ryzen Master. I'm running a Ryzen 7 1700 @ 3.9ghz/1.34375v prime95 stable. If I replaced it with B die RAM, will that allow for XMP speeds without crashes? |
Replies:
Posted By: datonyb
Date Posted: 15 Sep 2018 at 8:07am
|
a 1700 @ 3.9ghz using 1.43 volts.............. either your really not spending much time getting it lower or the cpu is a bit of a lemon now dont take that the wrong way its not meant to offend but .......we must then ask has it also got a really bad memory controller that causing the ram to not even moderately clock over jedec for reference my 1700 can run 3.9 ghz at 1.306 volts (its a little higher now to get the ram stable at 3466) but its still not anywhere near your volts (i think im on 1.35, maybe 1.375) i cant recall without checking its been a while since i looked ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: sdtech
Date Posted: 15 Sep 2018 at 10:19am
Oops. I meant 1.34375v.
|
datonyb wrote: