Intel Motherboards - Z370 fatal1ty itx, bios 3.10 with CSM disabled

Print Page | Close Window

Z370 fatal1ty itx, bios 3.10 with CSM disabled

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=9694
Printed Date: 13 Aug 2025 at 2:01am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Z370 fatal1ty itx, bios 3.10 with CSM disabled

Posted By: horald
Subject: Z370 fatal1ty itx, bios 3.10 with CSM disabled
Date Posted: 15 Sep 2018 at 4:41pm

" rel="nofollow - I just upgraded the bios from 1.70 to 3.10. However, with CSM disabled, there will be no post (black screen). The exact culprit is that video oprom policy can't be set to UEFI only. The bios of v. 1.70 does not have such problem. With CSM enabled, the start screen is not HD.

So I tried to roll back to 1.70 (downgrade). Downloaded the bios zip file and unzipped to a fat32 flash drive for instant flash. It just complained " invalid file" during the process. NO success.

I then tried to downgrade the bios with windows version. This time, it said it does not support the motherboard. No success again.

So how can I downgrade the bios from 3.10 to 1.70? Or I have to keep the bugged 3.10.

Replies:

Posted By: horald
Date Posted: 16 Sep 2018 at 6:48am

Little update:

1. The GPU is gigabyte g1 gaming gtx 1080 with F2 vbios.

2. The intel iGPU does not have this problem when I remove the pcie GPU (gtx 1080). It will show HD uefi with and without CSM .

3. With F2 vbios, I could make HD uefi (with CSM disabled) working on gtx 1080 after removing the card and resetting the bios of Z370 board. But with a hard reboot, the signal will be lost again

4. Flash the vbios to F3. I could get HD uefi with CSM disabled. When CSM is enabled , the uefi resolution will not be HD.

Posted By: ASRock_TSD
Date Posted: 18 Sep 2018 at 4:16pm

Dear Horald,

Thank you for choosing ASRock.

Regarding your case, we have built a system at our lab, with BIOS P3.10, set the CSM to disabled, ZOTAC GTX 1060 can display properly.

We provide the latest beta BIOS L3.12 for you to try.

Please download the BIOS from below link and update by Instant flash.

https://mega.nz/#!1kQHmCJJ!ZCPS7hyvOdmGcAWTPNNjb6O-0Wwp0LgiIcETelDez8w" rel="nofollow - https://mega.nz/#!1kQHmCJJ!ZCPS7hyvOdmGcAWTPNNjb6O-0Wwp0LgiIcETelDez8w

Yours truly,

ASRock TSD