HTPC&Gaming Barebone&Others - Hyper Quad M.2 questions/problems

Print Page | Close Window

Hyper Quad M.2 questions/problems

Printed From: ASRock.com
Category: Technical Support
Forum Name: HTPC&Gaming Barebone&Others
Forum Description: Question about HTPC&Gaming Barebone&Others
URL: https://forum.asrock.com/forum_posts.asp?TID=98281
Printed Date: 18 Apr 2025 at 7:05pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Hyper Quad M.2 questions/problems

Posted By: JohnJeffreyJones
Subject: Hyper Quad M.2 questions/problems
Date Posted: 18 Feb 2025 at 6:56pm

Hi all,

I just started to put a homelab system together and added a ASRock Hyper Quad M.2 card with two NVMe drives to it.

After enabling x4x4x4x4 bifurcation for the slot, I can see both NVMe and use them, however, within minutes to hours I find file system corruptions with using Linux' md raid across both (RAID1 mode).

After switching SW1 to "on" (and thus disabling "Utility Control" and also SW2/3 to "on" now referring to currently unused "CARD4", the situation was already better without any immediate file system corruption.

Therefore my question is, what is the effect of the "Utility control"? Does this somehow interfere with the standard PCIe protocol between the CPU and the NVMe to enable its functionality which could cause this issue?

The other question I got from the mainboard manufacturer's support is whether there is a possibility to upgrade the firmware. I think this is a moot question as the card should not have any real active components possibly besides this "control utility", right?

Cheers and thanks a bunch in advance for any replies!

PS: In case it matters:

Supermicro H13SAE-MF, Ryzon 9 7900, 2xG.Skill 48GB RAM (unfortunately only on die ECC), NVMe either 2 Crucial or mix of Samsung & Kingston