Print Page | Close Window

AB350 Gaming K4 No led chipset

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: http://forum.asrock.com/forum_posts.asp?TID=9946
Printed Date: 22 Feb 2024 at 11:23am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: AB350 Gaming K4 No led chipset
Posted By: mETALFIRTINa
Subject: AB350 Gaming K4 No led chipset
Date Posted: 19 Oct 2018 at 10:45am
" rel="nofollow - Hi, 
My board chipset LED no light and cannot change color.
Is my board dead?




Replies:
Posted By: ASRock_TSD
Date Posted: 19 Oct 2018 at 11:17am
Dear mETALFIRTINa,

Greetings, this is ASRock TSD.


Please install the ASRock RGB LED ver:1.0.34 to verify:
http://asrock.pc.cdn.bitgravity.com/Utility/LED/RGBLED%28v1.0.34%29.zip" rel="nofollow - http://asrock.pc.cdn.bitgravity.com/Utility/LED/RGBLED(v1.0.34).zip

If the symptom persists, please refer to the steps below to flash LED firmware:

1. Open CMD as an administrator (type "CMD" in search bar right click & choose "Run as administrator" from the context menu)
2. Go to RGB app installation folder by typing "cd C:\Program Files (x86)\ASRock Utility\ASRRGBLED\Bin\"
3. Flash the RGB chip using the following command "wICPFLASH.exe /File=nu51_1.10" - this takes around 15 seconds.


Thanks!

All the best,
ASRock TSD



Posted By: daywalker
Date Posted: 10 Dec 2019 at 3:59am
Hello,

I have the exact same problem with this mainboard. But the flash process always fails with the following output:

----------------------------------------------------------------------
   wICPFLASH v1.0.18 - ASRock Incorporation, all rights reserved
----------------------------------------------------------------------
Project Name = AB350 Gaming K4
BIOS Version = P5.40
Reading file: nu51_1.10...0...ok.
Enter ICP mode.
Company ID: 0x000000FF, Device ID: 0x00FF00FF
Erasing:     EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
Programming: PPPPPPPPPPPPPPPPPPPPPP
Verifying:   Verify error: address=0x00000000, value: 0x000000FF != 0x00000002


The chipset LED is still off. Please help.
Thanks!


Posted By: _Mael_
Date Posted: 11 Dec 2019 at 1:26am
Try to set in Bios Options


Posted By: daywalker
Date Posted: 11 Dec 2019 at 5:38am
Hi,
I have set led controller 1 and 2 to static light (red), but nothing happens.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net