Fatal1ty 990fx no CPU or CHA fans working

So I bought a Fatal1ty 990fx AM3+ in late january and within the last month I've had not 1 but 3 separate CHA and CPU fan prongs on the actual board go. No power to multiple fans and having to rely on 2 alternate chassis fans to cool my system. Has this been an issue with these boards that has been known (bios issue or just faulty board?) and is there any work around other than simply plugging them directly into my power supply and not being able to regulate them?

daniel.allemi wrote: So I bought a Fatal1ty 990fx AM3+ in late january and within the last month I've had not 1 but 3 separate CHA and CPU fan prongs on the actual board go. No power to multiple fans and having to rely on 2 alternate chassis fans to cool my system. Has this been an issue with these boards that has been known (bios issue or just faulty board?) and is there any work around other than simply plugging them directly into my power supply and not being able to regulate them?

The CPU and Chassis fan headers that apparently failed on your board were working at one time, correct?

Fans connected to these headers no longer spin up at all, correct? Did the fans just not start running one day, or you noticed they were not running suddenly?

You mentioned the "prongs" on the fan headers, which is just your description of these connectors, rather than one or more of the pins breaking off the board, correct?

What fans were you using on these fan headers when you noticed them no longer running? The make (such as Cooler Master, Noctua, etc), size and model numbers would be helpful to know.

I imagine you've tried changing the fan speed options in the BIOS for these fan headers.

Clearing the BIOS as suggested above does not involve starting the board with the CMOS jumper in the Clear position. That is not a special procedure for a CMOS/BIOS clear. The board may not even POST with the jumper in the clear position.

The board may be faulty, but more information about your fans will help with that question.

I've personally never seen fan headers on a board fail, and very rarely see posts in forums about failed fan headers. I don't recall any threads about fan header failures for your board. It is still possible, and if that is the case you may be able to RMA your board which should be within the warranty period.

Otherwise a standard work around would be using a separate fan controller mounted in your PC case. There are many types of these controllers available.