B1 B2 not working on X470 F4

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello All and thanks in advance for any advise.

I have a 4x8gb set Trident Z 32GB 3200 sequential SN. A1 and A2 are the only slots being used. B1 and B2 are seen on bios (latest version and latest chipset version) but not on windows. Any Ram in A1 and A2 can only run at 2133 ... unless B1 and B2 are empty ... then I can get 1600mhz

A1 - Normal boot with 1600mhz
A1 A2 - Normal boot with 1600mhz
A1 B1 - Only A1 is used at 2133/1066 ... F9 at Start
A2 B2 - Only A2 is used at 2133/1066 ... F9 at Start
A1 B1 A2 B2 - Only A1 A2 is used at 2133 ... F9 at Start
B1 B2 - complete freeze

Nothing placed in the B slots alone work and hangs on boot

I've tried 4 different memory kits and tried every possible combination of the kits with the slots and the behavior is exactly the same

Fresh install of Win10

Reset CMOS

No bent pins on the 2700x

The board has been like this since day one so I've only used A1 A2 but I now need the full 32.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Frank B Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 28 Jan 2020 Status: Offline Points: 3	Post Options Post Reply Quote Frank B Report Post Thanks(0) Quote Reply Topic: B1 B2 not working on X470 F4 Posted: 28 Jan 2020 at 4:45am
	Hello All and thanks in advance for any advise. I have a 4x8gb set Trident Z 32GB 3200 sequential SN. A1 and A2 are the only slots being used. B1 and B2 are seen on bios (latest version and latest chipset version) but not on windows. Any Ram in A1 and A2 can only run at 2133 ... unless B1 and B2 are empty ... then I can get 1600mhz A1 - Normal boot with 1600mhz A1 A2 - Normal boot with 1600mhz A1 B1 - Only A1 is used at 2133/1066 ... F9 at Start A2 B2 - Only A2 is used at 2133/1066 ... F9 at Start A1 B1 A2 B2 - Only A1 A2 is used at 2133 ... F9 at Start B1 B2 - complete freeze Nothing placed in the B slots alone work and hangs on boot I've tried 4 different memory kits and tried every possible combination of the kits with the slots and the behavior is exactly the same Fresh install of Win10 Reset CMOS No bent pins on the 2700x The board has been like this since day one so I've only used A1 A2 but I now need the full 32.