![]() |
Asrock 970 Pro3 R2.0 Memory Compatability |
Post Reply ![]() |
Author | |
flyinghaggis ![]() Newbie ![]() ![]() Joined: 02 Dec 2015 Location: Edinburgh Status: Offline Points: 5 |
![]() ![]() ![]() ![]() ![]() Posted: 02 Dec 2015 at 7:44pm |
I have the 970 Pro3 R2.0 with an Amd Athlon II X2 250 Regor Socket AM3 (938) core speed 3000Mhz and 6mb of 133Mhz memory fitted (Looking to change Memory). My question is - with this configuration, what is the maximum memory speed I can install using the above CPU to this board 133,1600,1800 or 2000 without any overclocking or tweaking. If the maximum is 133 can someone recommend a cpu that will be compatable with the minimum of a 1600Mhz module.
|
|
![]() |
|
wardog ![]() Moderator Group ![]() Joined: 15 Jul 2015 Status: Offline Points: 6447 |
![]() ![]() ![]() ![]() ![]() |
Your CPU supports UP TO DDR2-1066
http://www.cpu-world.com/CPUs/K10/AMD-Athlon%20II%20X2%20250%20-%20ADX250OCK23GQ%20%28ADX250OCGQBOX%29.html The below memory is Guaranteed to work on your MB. You'll note it isn't 1066 but will still have JEDEC/SPD timimgs to function properly at your CPUs stock memory speed. As a bonus, most likely at reduced timings too. http://www.gskill.com/en/configurator?manu=52&chip=42&model=1977 I do not work or am affiliated with ASRock or G.Skill. Their products just work good together. < id="kpm_plugin" ="application/x-KPMPlugin">
|
|
![]() |
|
flyinghaggis ![]() Newbie ![]() ![]() Joined: 02 Dec 2015 Location: Edinburgh Status: Offline Points: 5 |
![]() ![]() ![]() ![]() ![]() |
Perhaps it was my fault for not clarifying correctly Thank you for your reply but I am somewhat confused you/website state that the cpu and supports upto DDR2-1066 but I am running DDR3 133 on the motherboard now and according to this http://asrock.com/mb/AMD/970%20Pro3%20R2.0/index.asp?cat=Memory the board can run upto DDr2000 - I really want to know if I can run DDR 1600 or higher with the cpu I have at present. Perhaps it was my fault for not clarifying correctly
|
|
![]() |
|
wardog ![]() Moderator Group ![]() Joined: 15 Jul 2015 Status: Offline Points: 6447 |
![]() ![]() ![]() ![]() ![]() |
Your "133" in both posts confuses me. You better again. 1333MHz maybe?
I did, sorry. Your Regor supports DDR2 and DDR3. ""Your CPU supports UP TO DDR2-1066 < id="kpm_plugin" ="application/x-KPMPlugin"> "" I didn't finish that, sorry
Your CPU supports UP TO DDR2-1066 and DDR3-1066. ""I really want to know if I can run DDR 1600 or higher with the cpu I have at present."" You may get into OC'ing and heat issues, but so long as everything is kept cool I don't know why not. |
|
![]() |
|
flyinghaggis ![]() Newbie ![]() ![]() Joined: 02 Dec 2015 Location: Edinburgh Status: Offline Points: 5 |
![]() ![]() ![]() ![]() ![]() |
Sorry for the confusion - yes DDR3 - 1333Mhz It is the overclocking issues that I don't want so will stick with the DDR 1333 modules and just get 8mb modules until I am ready to upgrade the cpu. Thanks for your patience
Edited by flyinghaggis - 03 Dec 2015 at 12:00am |
|
![]() |
|
wardog ![]() Moderator Group ![]() Joined: 15 Jul 2015 Status: Offline Points: 6447 |
![]() ![]() ![]() ![]() ![]() |
You can run any MHz RAM you want so long as you're not asking the CPU to keep up at that speed. That's OC'ing. If you have a deal at hand for some memory in, say, up to 2133, go for it. In the BIOS you just set the speed you want the memory to run, w/o OC'ing. I hope I finally got my point across. If not reply back and we'll converse some more. < id="kpm_plugin" ="application/x-KPMPlugin">
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |