Hyper BCLK Engine Overclocking Questions

Hito wrote: If a Z170 Mainboard is combined with a K-model Intel CPU, this combination officially supports overclocking via changing the unlocked Multiplier of the CPU (K-model). f.e. a CPU that runs with (40)x(100MHz BCLK)=4GHz, can be set to run at (42)x(100MHz BCLK)=4.2GHz MyQuestion: is it possible to combine and use the official Multiplier Overclocking together with the Hyper BCLK Engine featured on many AsRock Motherboards on a K-model(Intel CPU with unlocked Multiplier)? f.e. to go from (32)x(100MHz BCLK) = 3.2GHz CPU Speed to (34)x(133MHz BCLK)=4,53GHz PS: i pray that i dont get a standard statement that was created for now the 1year-old dead discussion about the Overclocking_with_nonKmodel_discussions, because thats not part of HYPER BCLK ENGINE as those BetaBIOSes enabled OverClocking on Motherboards without Hyper BLCK Engine

If you could NOT adjust the core multipliers with a K type CPU, when over clocking with the BCLK, then BCLK over clocking would be virtually worthless.

Of course you can adjust the core multipliers when BCLK over clocking! I've done it myself, it works fine.

Setting the BCLK to 125MHz, and the core multipliers (set to All Cores) to 32, results in a 4.0GHz processor speed, for example.

The non-Z OC feature was only fully removed from non-Z chipset boards. BCLK over clocking of non-K type processors no longer works on Z170 chipset boards due to the CPU microcode that blocks non-Z OC AFAIK.

The Hyper BCLK Engine is an improved and more flexible source of the BCLK frequency. It has not been changed in any way by the Intel CPU microcode update that removed the non-Z OC feature.