jannekalle wrote: My build won't start to BIOS (no video). I've tried with two types of memory and monitor is plugged to the VGA output of Mobo...  Here's a link to Dr. Debug https://youtu.be/onykSkCwdPg I've got nothing connected besides 2 x CPU (Xeon-e5 2670 v1). Could it be the Mobo or the PSU or have I just forgotten something important?!  Thanks in advance! EP2C602-4L/D16 2 x XEON e5 2670v1 Corsair RM1000x (PSU)

Looks like all memory POST failure codes on the Dr Debug display.

Full model name and numbers of your memory, please.

Also, which DIMM slots are you using?

Try this while waiting on parsecs reply.

And yes. I agree with parsec. This is memory related.

I'm assuming you have 4 sticks from the kit F3-14900CL10Q-32GBZL.

One stick in each, A1, C1 and G1, E1


You might probably should clear the BIOS before trying to boot again with them in the slots above.

Reply with the results please.

jannekalle wrote: I installed the memory as advised and took out the CMOS battery for a while.

I really don't have personal experience with what's in front of you. What I did suggest is what I understand(or may not) in terms of your issue. Sorry.

Please contact ASRockRack Tech Support HERE and inquire of them.

And so I may glean the correct information if you'd post back the outcome I'd kindly appreciate you doing so.

I set up this same board last week with dual E5-2670's and it was a little tense on the first power up. Takes a while to get to the POST on this board after power on.