FM 2A75 Pro 4

OK so it stops on 10 then nothing happens?

robnorris wrote: I have recent got this off my mate and built it how ever when i turn it on the fans all spin but there is no signal on the monitor... It doesnt beep or anything when starting up or running hwever when you first turn it on it does display a few what look like codes but i have look on the internet and does all that i have been told to do how ever nothing seems to have changed its still doing the same thing over and over again I have also downloaded the user guide for this mother bored and it doesnt tell me in there either.  The coeds are 15 C5 84/04 10 ( not sure weather it 04 or 84 so i put in both) If someone knows what that means it would be great to know so i cant get it going....

Assuming those are POST codes, 10 is a problem related to the memory, or the memory controller in the CPU, so possibly a CPU problem too.

Did you get the board, CPU, and memory together from your friend? Or did you get the board alone and added the CPU and memory?

If you know the exact model number of the memory, that would help determine if it is compatible with the board and CPU.

Did you try clearing the CMOS/BIOS, and try to start it again?

If your memory is 1600 or faster, you must put the memory in slots A2 and B2.

Since you just built this PC, did you connect a four or eight pin power cable from the power supply to the 4/8 pin CPU power connector at the top - left side of the board? That is required for the CPU to work.