3 beeps without ram, no beeps and no post with ram

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi everybody. 
I have bought a new mobo (AsRock 970M Pro3). 
After putting the parts together tried to turn it on but no beeps and no post at all. 
Have removed everything (Left only the Cpu AMD FX8350 4.0GHz). 
It beeps 3 times continuously. When I've putted the memory (Ram Ddr3 Patriot Viper 3 Red Venom 1x8Gb 1600 MHz) it wasn't beep at all and no post, no signal to the monitor. All the parts are in good condition have worked before (Ram too). I have tried another stick of Ram in all 4 slots but same thing. 

My specs: 
Mobo, AsRock 970M Pro3. 
Cpu, AMD FX8350 @ 4.00GHz. 
Ram, Patriot Viper 3 Red Venom 1600MHz 1x8Gb. 
Gpu, ATI Radeon R9 280X Sapphire Dual-X 3.0Gb Oc Edition. 
Psu, Chieftech 750Watt Bronze Edition. 
1-st Drive, Ssd Samsung 840 Evo 120Gb. 
2-nd Drive, WD EZEX Blue 1Tb. 
3-rd Drive, Samsung KJ321 320Gb. 

Please Help.

Edited by Erigert - 06 Oct 2015 at 10:25pm

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Erigert Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 06 Oct 2015 Location: Fier, Albania Status: Offline Points: 5	Post Options Post Reply Quote Erigert Report Post Thanks(0) Quote Reply Topic: 3 beeps without ram, no beeps and no post with ram Posted: 06 Oct 2015 at 9:36pm
	Hi everybody. I have bought a new mobo (AsRock 970M Pro3). After putting the parts together tried to turn it on but no beeps and no post at all. Have removed everything (Left only the Cpu AMD FX8350 4.0GHz). It beeps 3 times continuously. When I've putted the memory (Ram Ddr3 Patriot Viper 3 Red Venom 1x8Gb 1600 MHz) it wasn't beep at all and no post, no signal to the monitor. All the parts are in good condition have worked before (Ram too). I have tried another stick of Ram in all 4 slots but same thing. My specs: Mobo, AsRock 970M Pro3. Cpu, AMD FX8350 @ 4.00GHz. Ram, Patriot Viper 3 Red Venom 1600MHz 1x8Gb. Gpu, ATI Radeon R9 280X Sapphire Dual-X 3.0Gb Oc Edition. Psu, Chieftech 750Watt Bronze Edition. 1-st Drive, Ssd Samsung 840 Evo 120Gb. 2-nd Drive, WD EZEX Blue 1Tb. 3-rd Drive, Samsung KJ321 320Gb. Please Help. Edited by Erigert - 06 Oct 2015 at 10:25pm

parsec Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 04 May 2015 Location: USA Status: Offline Points: 4996	Post Options Post Reply Quote parsec Report Post Thanks(0) Quote Reply Posted: 06 Oct 2015 at 11:45pm
	Sorry but must check, do you have the 4 or 8 pin CPU power cable connected to the board? It is the 8PIN EPS (4+4) cable. The connector on the board is in the upper left corner of the board, near the connectors for the IO panel. That power cable must be connected or the CPU won't work. If you do have that cable connected, please check that the cable is NOT a power cable for a video card. They look similar but the +12V and ground/earth connections are reversed, so won't work correctly. There are very few 8GB models of memory that are compatible with your board. But it seems the memory may be compatible with your board. When you move the memory to different slots, you must clear the CMOS/BIOS every time or the memory may not be detected correctly. When using one stick of memory, it should be put in the B2 or A2 slots.


Xaltar Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 25028	Post Options Post Reply Quote Xaltar Report Post Thanks(0) Quote Reply Posted: 07 Oct 2015 at 1:08am
	If you have got all the power connectors correctly hooked up then you may want to remove the CPU and check for bent pins. The memory controller is built in to the CPU so if 1 or more pins are bent it can easily result in the symptoms you describe. You stated that all the parts were known working prior to the new board which means the CPU came from another system/board? I have often found that AMD CPUs are irritatingly easy to bend pins on, especially when swapping them from one system to another. Usually with some patience and careful adjustment it is possible to straighten them. As you are getting the no memory beeps when you have no RAM in the system that rules out silly things like the clear CMOS jumper being in the wrong place or the reset header being shorted. Also be sure that you do not have anything under the motherboard that could be shorting out the circuits like misplaced standoffs or loose screws.

Erigert Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 06 Oct 2015 Location: Fier, Albania Status: Offline Points: 5	Post Options Post Reply Quote Erigert Report Post Thanks(0) Quote Reply Posted: 07 Oct 2015 at 1:42am
	I will try another cpu tomorrow. Hope to update the bios and try again the FX8350.

Erigert Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 06 Oct 2015 Location: Fier, Albania Status: Offline Points: 5	Post Options Post Reply Quote Erigert Report Post Thanks(0) Quote Reply Posted: 08 Oct 2015 at 2:05am
	The jumper was missing from mobo.