ASROCK b450m PRO4 + G.Skill aegis DDR4-3000

I hope you dont work for asrock

Hey man, did you ever update your bios even? It is to bad asrock doesn't reply but the problem isbso small to do so.

Ah thats to bad you go for a different motherboard. If your are on a budget i alsays recommend the pro4 if u have more to spend and wanna oc maybe the msi mortar is gour thing.

All asrock would have done is probably take your board in and get it back after a long time. Always better to RMA any product that you feel not sure or completely comfortable fitting with you.

For me... I use asrock first time ever... I am really satisfied... As a person who love to max out amd tweak the pro 4 is very budget and capable forbthat price. This board is ptrbably among the better ones in his price class and a bit above. Aftsr this board im interested in mortar personally which secretly is a x470 in disguise. After this id go look at x470 boards but skip the cheapest as the mortar easily out vrm them. If the pro 4 bios + options were as extended as for example a tai chi or fatality than pro 4 would be rocking even harder (for the price). Anysay this doesnt help you but i was just here to tell you that asrock isnt as bad as you think.

The person wbo says that many people report aegis doesnt work on ryzen is absolutely plucked out of the air. I picked this set blindly (trusting agesa). And i found out many with me use it on ryzen, even at 3200mhz. Now i havent oced much of my memory yet but flawless worked xmp and at 3133mhz with slightly tighter timings.

Hehe to bad i wasnt in ur position, would love to solve it and figure it out.

mknerd wrote: hello, here again for post some news. i bought new ram, the Hyper X ddr4 3000 mhz 8gbX2 but again the same issue.... i saw this is compatible with my MB but nothing.... now i don't know how to fix this problem..... any solutions?

First of all both kits will work like i stated above. You can take next steps.

1. Power off your pc, turn of I/O psu now hold your power button 15 secs to suck away all power of your board + ram.

2. RESEAT your ram. Starting at the slot furthest away from your cpu and than you leave one open next to it and insert the next module in the next slot (2nd slot from your cpu side) [|[| like that where '[' is the ram module

3. Clear cmos with jumper or in bios press f9 for default settings save and exit. (preferably first option)

4. Get into your new fresh bios. Go to OC page and set your ram profile to XMP. Save and exit see if you can bumo into windows on the XMP. Should work.

Good luck

hello, here again for post some news.

i bought new ram, the Hyper X ddr4 3000 mhz 8gbX2 but again the same issue.... i saw this is compatible with my MB but nothing.... now i don't know how to fix this problem..... any solutions?

xhue wrote: Did you make sure both sticks are well seated in their slots? DDR4 is not novice-friendly. Amyhow, re-seat the RAM in A2 & B2, clear CMOS and see if mobo detects the entire RAM pool even at default speeds. It's also worth it to check CPU seating too.

i try, and nothing change. Bios detects the entire pool but instead dual-channel only in single channel