![]() |
X470 Taichi Nvme issue |
Post Reply ![]() |
Page 12> |
Author | |
Arax ![]() Newbie ![]() Joined: 12 Feb 2018 Location: Pittsburgh Status: Offline Points: 11 |
![]() ![]() ![]() ![]() ![]() Posted: 10 Aug 2019 at 8:46am |
Well,
I installed the latest amd chipset drivers and the latest raid expert and drivers, and raid expert showed the legacy nvme drive twice, one online and one offline. I deleted the the offline drive and thought my problem was solved, but upon reboot, the raid sreen showed two legacy nvme drives, one online and one offline again, but the offline one does not show up in raid expert. Also, windows disk management showed the 240gb nvme drive as 512gb with 1 240gb partion and the rest unallocated space. Very strange. After trying to fix this for awhile now I changed everything to ahci and formatted all over again with a fresh install of win 10 and so far all is well. I have been building and using pc's since 1996 and have never ran into anything like this. Any thoughts would be appreciated. |
|
![]() |
|
Arax ![]() Newbie ![]() Joined: 12 Feb 2018 Location: Pittsburgh Status: Offline Points: 11 |
![]() ![]() ![]() ![]() ![]() |
No, I am not using nvme raid mode. I might just start all over again and go ahci because I can back up all the data on my raid 0 storage now, getting kind of fed up with this.
|
|
![]() |
|
gizmic ![]() Groupie ![]() ![]() Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
![]() ![]() ![]() ![]() ![]() |
no the nvm shouldnt be in offline/legacy mode in raidexpert it shouldn't be visible there.
and normally youre windows will be unstable in ahci because it is a broken raid drive. are you enabling nvm raid mode in the amd menus? because you dont have to do that unless you are using nvm raid |
|
![]() |
|
![]() |
|
Arax ![]() Newbie ![]() Joined: 12 Feb 2018 Location: Pittsburgh Status: Offline Points: 11 |
![]() ![]() ![]() ![]() ![]() |
Okay,
First I managed to revert the bios from 3.43 back to 2.00 using ami tools in an efi shell, did a clear cmos to reset everything, and the nvme showed up once again as offline in raid mode, but would no longer be stable in windows 10 in ahci mode. I went back to raid mode and tried to boot into windows to see what it would do, and It wanted to do a reset of win 10. I figured what the hell I was going to start over anyhow, and the reset went ok, I got my raid 0 storage back and Its booting off of the nvme and is good to go. Somehow my win 10x64 install got trashed and I do not know how. But now my question is " Do all nvme drives show up as legacy offline in raid mode? Maybe it was always like that and I never noticed, but I thought it was the problem because it would not boot. What does everybody think on this? Am I missing something? Thanks in advance |
|
![]() |
|
Arax ![]() Newbie ![]() Joined: 12 Feb 2018 Location: Pittsburgh Status: Offline Points: 11 |
![]() ![]() ![]() ![]() ![]() |
I'm away from the pc right now but will try that on Sunday, and I'm pretty sure csm is disabled, thanks much!
|
|
![]() |
|
Arax ![]() Newbie ![]() Joined: 12 Feb 2018 Location: Pittsburgh Status: Offline Points: 11 |
![]() ![]() ![]() ![]() ![]() |
I'm away from the pc right now but will try that on Sunday, and I'm pretty sure can is disabled, thanks much!
|
|
![]() |
|
gizmic ![]() Groupie ![]() ![]() Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
![]() ![]() ![]() ![]() ![]() |
try to update the amd drivers and raid installer it just released see if it helps
btw are you on csm disabled? |
|
![]() |
|
![]() |
|
Arax ![]() Newbie ![]() Joined: 12 Feb 2018 Location: Pittsburgh Status: Offline Points: 11 |
![]() ![]() ![]() ![]() ![]() |
It's kinda strange how this all started, I swapped out a stand alone data hdd drive(non raid) for a larger one and tried to boot from optical drive in boot manager for minitool partition wizard,that crashed and then optical drives were not available anymore. Cleared cmos got the optical back but now I have the nvme issue. Maybe the partition wizard screwed something up? Maybe I should just unplug all sata's and start over?
|
|
![]() |
|
Arax ![]() Newbie ![]() Joined: 12 Feb 2018 Location: Pittsburgh Status: Offline Points: 11 |
![]() ![]() ![]() ![]() ![]() |
I tried that and it didn't work either.
|
|
![]() |
|
gizmic ![]() Groupie ![]() ![]() Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
![]() ![]() ![]() ![]() ![]() |
it shouldnt list your nvme as offline unless it was marked as a non raid raid volume hahaha i know its confusing
you could try to enable nvme raid in the amd menus see would that help |
|
![]() |
|
![]() |
Post Reply ![]() |
Page 12> |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |