![]() |
GTX 1070 not working on A320m DGS |
Post Reply ![]() |
Page 12> |
Author | |
MadManMuhamed1 ![]() Newbie ![]() Joined: 11 Mar 2020 Status: Offline Points: 9 |
![]() ![]() ![]() ![]() ![]() Posted: 13 Mar 2020 at 3:36pm |
I'm gonna try that too and podt the results here, but right now I am using my friends motherboard and it's working perfectly with the same PSU. Will try to get one and try soon.
|
|
![]() |
|
Xaltar ![]() Moderator Group ![]() ![]() Joined: 16 May 2015 Location: Europe Status: Online Points: 25708 |
![]() ![]() ![]() ![]() ![]() |
Try a different PSU, preferably one with a single 12v rail. I didn't even notice
that you are using a BeQuiet low wattage unit (sub 700w). That thing is only 500w and splits that 500w over more than one rail which means the GPU is probably not getting enough power from that single 8 pin. It literally can only provide 18a per rail which means it basically can only provide 200w per rail. Not good enough for a 1070. The board with the 8pin power is likely as you suspected providing a bit more power through the PCIe slot but the single 8pin on the GPU should be enough to run the card if it's getting enough amps and the board is providing it's required 75w (which is the spec so it should be). |
|
![]() |
|
![]() |
|
MadManMuhamed1 ![]() Newbie ![]() Joined: 11 Mar 2020 Status: Offline Points: 9 |
![]() ![]() ![]() ![]() ![]() |
To clarify, my RX 570 needed an 8 Pin and a 6 PIN to power it. My GTX 1070 only needs one 8 PIN for external power even tho it has a higher TDP, maybe ot relies on the PCIe slot for most of its power draw.
|
|
![]() |
|
MadManMuhamed1 ![]() Newbie ![]() Joined: 11 Mar 2020 Status: Offline Points: 9 |
![]() ![]() ![]() ![]() ![]() |
The only noticable diffrence between the two motherboards is that mine has only a 4 pin connector while my friend's has 8 pins. Maybe the power delivery on the DGS is capped at 75W while the GPU needs more? This is the only plausible reason I can come up with.
|
|
![]() |
|
ThreeDee ![]() Senior Member ![]() ![]() Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396 |
![]() ![]() ![]() ![]() ![]() |
hmm .. got me scratching my head
|
|
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|
![]() |
|
MadManMuhamed1 ![]() Newbie ![]() Joined: 11 Mar 2020 Status: Offline Points: 9 |
![]() ![]() ![]() ![]() ![]() |
Yes I did that too. I have no idea why it isn't working. I traded my motherboard with my friends and it worked just fine.
|
|
![]() |
|
ThreeDee ![]() Senior Member ![]() ![]() Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396 |
![]() ![]() ![]() ![]() ![]() |
Have you tried taking the motherboard out of the case and try the 1070 and see if you get a display?
|
|
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|
![]() |
|
MadManMuhamed1 ![]() Newbie ![]() Joined: 11 Mar 2020 Status: Offline Points: 9 |
![]() ![]() ![]() ![]() ![]() |
I tried DP and HDMI, I don't have a DVI cable, so I might get one soon to try. But my PC just doesn't POST which doesn't happen with any other GPU. It's like the GPU doesn't get recognised.
|
|
![]() |
|
Xaltar ![]() Moderator Group ![]() ![]() Joined: 16 May 2015 Location: Europe Status: Online Points: 25708 |
![]() ![]() ![]() ![]() ![]() |
Have you tried different display outputs? If you have tried HDMI then try DP or DVI.
|
|
![]() |
|
![]() |
|
MadManMuhamed1 ![]() Newbie ![]() Joined: 11 Mar 2020 Status: Offline Points: 9 |
![]() ![]() ![]() ![]() ![]() |
Yes my RX 570 still works too. I made sure to push it in until I heard a click but with no success.
|
|
![]() |
Post Reply ![]() |
Page 12> |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |