Cannot enable RAM in A1/B1

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I had a 2200g that would not run stable at any speeds with 4 sticks installed. I upgraded to a 3400g and now I can run the same 4 8gb sticks at 3200mhz without issue.

A limitation of the memory controller on your cpu... kind of luck of the draw.. in my case, bad luck.

You can try updating your bios to 4.10 and that might help to get all 4 sticks running .. maybe not at their rated speeds though.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
ThreeDee Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396	Post Options Post Reply Quote ThreeDee Report Post Thanks(0) Quote Reply Topic: Cannot enable RAM in A1/B1 Posted: 29 Mar 2020 at 11:40am
	I had a 2200g that would not run stable at any speeds with 4 sticks installed. I upgraded to a 3400g and now I can run the same 4 8gb sticks at 3200mhz without issue. A limitation of the memory controller on your cpu... kind of luck of the draw.. in my case, bad luck. You can try updating your bios to 4.10 and that might help to get all 4 sticks running .. maybe not at their rated speeds though.
	\|Ryzen 5 5900\|ASRock X570 Taichi-BIOS 4.60\|2x16GB HyperX Predator RGB 3200@3600 1:1 IF\|ASRock RX 6700XT\|2 x PCIe 4.0 M.2 Drives for OS & Games\|850 WTT Seasonic 80+ Titanium PSU\|Noctua NH-D15\|

jd907 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 29 Mar 2020 Location: Pittsburgh Status: Offline Points: 3	Post Options Post Reply Quote jd907 Report Post Thanks(0) Quote Reply Posted: 29 Mar 2020 at 7:41am
	First time posting here. Motherboard: ASROCK BM 450 Pro 4, BIOS 3.10 Processor: AMD Ryzen 3 2200G I have 2x4gb G.Skill Ripjaws DDR4-2800 that I've had in A2/B2 for shy of a year and things have worked great. https://www.newegg.com/g-skill-8gb-288-pin-ddr4-sdram/p/N82E16820231894?Item=N82E16820231894 I bought the exact same set of ram (2x4gb) to get it up to 16gp. I installed them in A1/B1 and I get the "boot loop". I've tried clearing the CMOS by taking out the battery and then using a screwdriver to short the two pins (I lost the jumper) while I hold down the power. No Luck. I havent found another post describing how to get it working with ram in all four slots.