|
x99 ws-e show problem |
Post Reply 
|
Page 12> |
| Author | |
wardog 
Moderator Group 
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: x99 ws-e show problemPosted: 03 Dec 2015 at 10:37pm |
Um, Yeah! < id="kpm_plugin" ="application/x-KPMPlugin">
|
|
 |
|
|
twisterice
Newbie 
Joined: 03 Dec 2015 Status: Offline Points: 38 |
Post Options
Thanks(0)
Quote Reply
Posted: 03 Dec 2015 at 9:21pm |
|
thank you very much...at the end it was only a cable...however this machine is a bullet :)
|
|
|
|
|
wardog
Moderator Group
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
Quote Reply
Posted: 03 Dec 2015 at 7:25pm |
|
That makes ya feel better, huh .......
Glad to hear you got it running. Enjoy. < id="kpm_plugin" ="application/x-KPMPlugin">
|
|
|
|
|
twisterice
Newbie
Joined: 03 Dec 2015 Status: Offline Points: 38 |
Post Options
Thanks(0)
Quote Reply
Posted: 03 Dec 2015 at 7:18pm |
|
Thank you for all your support
 |
|
|
|
|
twisterice
Newbie
Joined: 03 Dec 2015 Status: Offline Points: 38 |
Post Options
Thanks(0)
Quote Reply
Posted: 03 Dec 2015 at 7:17pm |
|
ok now is good...it was a power cable defective...now all starts
correctly and now i see the bios....all parameters seems to be ok...cpu
and ram....i've just enable intel vt-x and wake up on lan...restart and
see the right changes on the bios...and now seems to be ok
 |
|
|
|
|
wardog
Moderator Group
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
Quote Reply
Posted: 03 Dec 2015 at 6:35pm |
|
Sorry. Went shopping.
How's hings going there now that you got the 8-pin Power connected, and cleared the cmos? < id="kpm_plugin" ="application/x-KPMPlugin">
|
|
|
|
|
twisterice
Newbie
Joined: 03 Dec 2015 Status: Offline Points: 38 |
Post Options
Thanks(0)
Quote Reply
Posted: 03 Dec 2015 at 6:02pm |
|
ok after having installed correctly the cpu power cable, now the motherboard starts but dr.debug show an issue....06 or 60 code....i read code 60 watching the motherboard with reading the words asrock.
looking to the error codes it show this: 01 - 54 (except 0d), 5A- 60Problem related to memory. Please re-install the CPU and memory then clear CMOS. If the problem still exists, please install only one memory module or try using other memory modules. cpu is installed correctly.....the ram module are instelled in four-channel mode as described in the manual (installed in the black socket) well, as indicated i try to clear cmos and start again.... |
|
|
|
|
twisterice
Newbie
Joined: 03 Dec 2015 Status: Offline Points: 38 |
Post Options
Thanks(0)
Quote Reply
Posted: 03 Dec 2015 at 5:33pm |
|
Ok the hardware assembled is:
Cpu Intel Xeon E5-2620 v3 - 2.4ghz Motherboard AsRock x99 ws-e part no. 90-mxgw30-a0uayz Video card PNY Nvidia Quadro k2200 4gb pci-e x16 Psu Corsair AX1200i Storage no.4 SSD Samsung Evo 850 - 500gb Ram Corsair Dominator Platinum ddr4 2666mhz mod. cmd32gx4m4a2666c15 (4x8=32) installed in four-channel mode (installed on the black socket...a1, b1 c1, d1) Cpu fan Noctua NH-D15 |
|
|
|
|
twisterice
Newbie
Joined: 03 Dec 2015 Status: Offline Points: 38 |
Post Options
Thanks(0)
Quote Reply
Posted: 03 Dec 2015 at 5:25pm |
|
Hello,
if you mean the 8-pin atx 12v power connector (atx12v1), i've not used because i've only connected the main atx power to psu (atxpwr1). The psu is Corsair AX1200i. So i've to connect alsto the atx power connector indicated in the manual in the description at no.3 (also described at page 30 on the manual) directly to the psu? So if yes, as i've not connected but powered on... the motherboard should not be damaged. |
|
|
|
|
wardog
Moderator Group
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
Quote Reply
Posted: 03 Dec 2015 at 4:18pm |
|
And if you have .........
NM, please list out your hardware specs with model #'s if that 8-pin WAS connected and still behaving this way. Knowing those helps us help you. < id="kpm_plugin" ="application/x-KPMPlugin">
|
|
|
|
|
Post Reply
|
Page 12> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
twisterice wrote: