![]() |
X99 Extreme4/3.1 Won't Post w/4 Sticks RAM |
Post Reply ![]() |
Page 12> |
Author | |
andressergio ![]() Newbie ![]() ![]() Joined: 29 Apr 2016 Location: Uruguay Status: Offline Points: 16 |
![]() ![]() ![]() ![]() ![]() Posted: 02 May 2016 at 2:09pm |
Are u guys adding +0.20 to System Agent and adding volts to RAM ?
|
|
![]() |
|
Blaise170 ![]() Newbie ![]() ![]() Joined: 27 Apr 2016 Status: Offline Points: 1 |
![]() ![]() ![]() ![]() ![]() |
I'm having a problem with my Extreme4 as well. Using slots A1/B1/C1/D1, I only see three RAM sticks in BIOS, but using A1/B1/C1/C2 has no problem. I'm guessing the slot is not working because I tried a known working stick and it did not work either. Is there anything wrong running the memory in A1/B1/C1/C2 long term, or should I RMA the board?
|
|
![]() |
|
dsmitherines ![]() Newbie ![]() Joined: 14 Jan 2016 Location: USA Status: Offline Points: 3 |
![]() ![]() ![]() ![]() ![]() |
Your note about memory is very interesting. I have the 2400 version of G.Skill memory listed here on Newegg. http://www.newegg.com/Product/Product.aspx?Item=N82E16820231888 My memory was not listed in the link you sent me. This might be one of the best explanations of what is going on with my board. Thank you. I'll give my local Micro Center a shot, but I would be kind of salty to pay a projected $120 for them to tell me to buy new memory. I am not necessarily tied down to G.Skill as a brand. I used them in my first build and figured that I would buy them again. Do you have any RAM recommendations? Hopefully without giant heatspreaders to allow for CPU cooler clearance. That was almost a huge problem on my current build. I am not sure if I can reach the slots closest to my CPU.
|
|
![]() |
|
wardog ![]() Moderator Group ![]() Joined: 15 Jul 2015 Status: Offline Points: 6447 |
![]() ![]() ![]() ![]() ![]() |
Clarification of the BIOSes of the /3.1 and standard NON /3.1
If you'll look at the released dates and revisions of the two boards BIOSes you'll notice same dates and desc of fixes. A BIOSes "innards' are now modular so with the exception of the /3.1 BIOS addressing any possible later FW update to the included USB 3.1card, I'm assuming ASRock considers them the same. The boards are identical as far as I'm aware, other that the /3.1's included USB3.1 card. |
|
![]() |
|
wardog ![]() Moderator Group ![]() Joined: 15 Jul 2015 Status: Offline Points: 6447 |
![]() ![]() ![]() ![]() ![]() |
re: P1.20 - That's the latest Production BIOS yet there is a BETA, L1.24, and it again addresses memory compatibility issues. It's not that an "older' BIOS can only handle lower speed memory. It's that DDR4 started production at lower speeds and now that the memory manufacturers have been coming out with an ever expanding plethora of sizes and faster speeds the motherboard manufactures have been playing catch up in their continually releasing new BIOS releases for the X99 platform in keeping up with new and or faster sticks. How to update? As I said, you'll most likely need a different memory to do this. I'll again inquire, what's the memory kit p/n? Below is the link to the G.Skill Memory Configurator listing all the compatible G/Skill memory that G.Skill certifies for the NON-3.1 version of your board, the X99 Extreme4. The BIOS revisions between the two, your /3.1 and the NON /3.1 appear to be the same as the added 3.1 controllers is not issued commands from within the BIOS seeings it's a 3rd party add-on chip. http://www.gskill.com/en/configurator?manu=52&chip=2276&model=2297 If whatever 16GB(2x8GB) Kit p/n you have is not shown on the links listing it is more than likely not compatible. More than likely not. The L1.24 BETA was just released Dec 03 2015, so it may or may not address your 2400 sticks. But it's worth a shot for what effort and cost are involved. Do you have a computer repair shop near that may charge a minimal charge to take your system there to try with? Meh, another option for ya anyways. |
|
![]() |
|
dsmitherines ![]() Newbie ![]() Joined: 14 Jan 2016 Location: USA Status: Offline Points: 3 |
![]() ![]() ![]() ![]() ![]() |
I am using G.Skill Ripjaws 2x8 GB DDR4 2400. The sticker says "P 1.20." Don't have anyone to swap sticks with nearby, unfortunately. Can the older BIOS versions only take >2133 sticks? Also, how would I update my BIOS if I cannot even see anything on screen?
Edited by dsmitherines - 14 Jan 2016 at 7:22am |
|
![]() |
|
wardog ![]() Moderator Group ![]() Joined: 15 Jul 2015 Status: Offline Points: 6447 |
![]() ![]() ![]() ![]() ![]() |
You don't say which memory Kit and its speed. Is your board running the latest BIOS? Your BIOS chip has a white sticker over with writing. What does it say printed on it? Odds are it is a now an older BIOS. If you have a friend with some ~2133 sticks ask to borrow them and test with. Assuming it boots with these borrowed sticks, while still in place, update your BIOS. |
|
![]() |
|
dsmitherines ![]() Newbie ![]() Joined: 14 Jan 2016 Location: USA Status: Offline Points: 3 |
![]() ![]() ![]() ![]() ![]() |
Was there any resolution to this issue? I am having similar issues with the same board. I am using 2x8 GB G.Skill ram, an Intel Core i7-5280K, and an Nvidia GTX 660 Ti. I have changed around the RAM and inspected for bent pins, and I cannot find anything that would be amiss.
|
|
![]() |
|
Xaltar ![]() Moderator Group ![]() ![]() Joined: 16 May 2015 Location: Europe Status: Offline Points: 23993 |
![]() ![]() ![]() ![]() ![]() |
You did not mention if you are able to post with a single stick of RAM in any of the other slots. If not then try what wardog suggested, keep 1 module in A1 and then try a second in each consecutive slot and see if any fail to post. If they all fail then it is likely the CPU is not seated correctly or you have bent pins in the socket.
The odds of 3 bad slots goes from rare to exceedingly rare. Generally if it is some kind of physical defect on the board it will be either all slots fail or just one fails with one being due to a physical defect in the slot itself and all being a defect in the board circuitry. Let us know how you get on.
|
|
![]() |
|
wardog ![]() Moderator Group ![]() Joined: 15 Jul 2015 Status: Offline Points: 6447 |
![]() ![]() ![]() ![]() ![]() |
Also, before tearing it down, and I hate to imply this, but,,,,,,,,, place you memory in dual channel using two sticks, then three, then four to rule out a possible bad ram slot.
I know, but it does happen on rare occasion. |
|
![]() |
Post Reply ![]() |
Page 12> |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |