C236 WSI do not start

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello, i bought an C236 WSI Mainboard. The Bios IC was changed before and the person where i bought it from did not get to start it. I put an Pentium G4560 CPU and an "SK Hynix 8GB DDR4 PC4-2400T HMA81GU6AFR8N-UH" in it. 

I changed the empty CMOS Battery and bridged the CMOS empty-contacts. But the System does not start by me too. Nothing happens when i press the Power Button.

I saw that the Pentium G4560 are supported at bios version "P2.10". Could that be the Problem? I dont know which version is installed.

I am happy for your help.

Best regards
Kauz

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Kauz Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 30 Dec 2020 Status: Offline Points: 3	Post Options Post Reply Quote Kauz Report Post Thanks(0) Quote Reply Topic: C236 WSI do not start Posted: 30 Dec 2020 at 12:48am
	Hello, i bought an C236 WSI Mainboard. The Bios IC was changed before and the person where i bought it from did not get to start it. I put an Pentium G4560 CPU and an "SK Hynix 8GB DDR4 PC4-2400T HMA81GU6AFR8N-UH" in it. I changed the empty CMOS Battery and bridged the CMOS empty-contacts. But the System does not start by me too. Nothing happens when i press the Power Button. I saw that the Pentium G4560 are supported at bios version "P2.10". Could that be the Problem? I dont know which version is installed. I am happy for your help. Best regards Kauz