Asrock H100 Pro BTC+ no display

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I just bought brand new parts for a mining rig.

The parts:
- Asrock H100 Pro BTC +
- Intel Pentium G4560
- Corsair 8GB DDR4 2400MHz C16
- LC POWER LC1650 V2.31 - Mining Edition PSU

The system is powering up with the CPU fan spinning, but there is no diplay, no beep and no light in the RGB keybord. (connected with DVI cable to a monitor that has DVI. No adapter present)

- Checked the CPU socket
- Changed RAM slot
- Tested with another monitor
- Tested with another DVI cable
- Tested with the PSU from my gaming rig
- Tested with the GPU from my gaming rig. Tested with both DVI from the mobo and with HDMI and DP from the GPU.
(RGB on the GPU comes on when starting the system)
- Preformed reset with removing the mobo battery and resetting CMOS

I just can get any display signal out of this system.
So now am out of ideas and need some help, please. 

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
lurvik Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 10 Feb 2021 Location: Norway Status: Offline Points: 3	Post Options Post Reply Quote lurvik Report Post Thanks(0) Quote Reply Topic: Asrock H100 Pro BTC+ no display Posted: 10 Feb 2021 at 6:22am
	I just bought brand new parts for a mining rig. The parts: - Asrock H100 Pro BTC + - Intel Pentium G4560 - Corsair 8GB DDR4 2400MHz C16 - LC POWER LC1650 V2.31 - Mining Edition PSU The system is powering up with the CPU fan spinning, but there is no diplay, no beep and no light in the RGB keybord. (connected with DVI cable to a monitor that has DVI. No adapter present) - Checked the CPU socket - Changed RAM slot - Tested with another monitor - Tested with another DVI cable - Tested with the PSU from my gaming rig - Tested with the GPU from my gaming rig. Tested with both DVI from the mobo and with HDMI and DP from the GPU. (RGB on the GPU comes on when starting the system) - Preformed reset with removing the mobo battery and resetting CMOS I just can get any display signal out of this system. So now am out of ideas and need some help, please.