X570 Taichi ram advice

I've just moved from the MSI Pro Carbon X570 to the ASRock Taichi X570 and am having issues with my G.Skill Trident Z 3600 C17 Kit. When I try to boot the XMP profile at 3600mhz on the Taichi it will post but not boot to Windows. The same kit worked at this speed on the MSI mobo.

I'm afraid I can't help on that front, my DAW is Threadripper based, completely
different RAM support and I am only running 64gb. GSkill has good compatibility
with AMD and lists most ASRock boards in their QVLs, hence my suggestion. Check
out their website and products.

RAM can be tricky, especially high capacity kits but I would recommend you check
out GSkill's AMD tuned offerings, find a kit with nice tight timings for DAW work.
Speed isn't as important as latency so don't be shy to go for a 2666 kit (4x32)
with tight timings vs a high frequency kit with loose ones.

I would also advise that you install your GPU in the lower X16 slot to keep airflow
over your chipset unimpeded, a shorter GPU in the top slot will also work well.
The last thing you want, unless you will be keeping the PC isolated, is the noise
from the fan (electrical and actual audible) interfering with your recordings.
That little chipset fan can put out quite a racket if it's not getting enough
air.

Given the X570 Taichi is a higher end board it should be included on many RAM
vendor's QVL pages.