TPM

I tried asking. But the bastards won't send it. Their resonse was the CPU isn't supported. So no BIOS for you...



Hi XXX,   Thank you for choosing ASRock and contacting us.   Microsoft has revealed that the system requires to have a minimum of Intel 8 Gen / AMD Zen+ CPU Gen CPUs to support Windows 11. Intel: supports since Intel 8th Gen processors AMD: support since Zen+ processors In addition, to use Windows 11, the TPM function may be required. The fTPM function is available for all of the Intel 8th Gen processors(and above) / AMD Zen+ processors supported platforms. Please make sure to enable the fTPM function via the BIOS. In shorts, AMD 990FX doesn't support Win11, we will need to get a new MB that supports Intel Intel 8 Gen or AMD Zen+ CPU Gen CPUs to support Windows 11.   Hope this information help   Thank you, Sincerely, ASRock TSD

I prompted them again and asked for the BIOS that re-enabled TPM support. But they refused.


So if someone could put the BIOS on a google drive. That would be super!

I'm just a casual observer, but would it be so hard to post the bios publicly? Also, I'm assuming most of you are trying to legitimately install windows 11. I heard the physical processor itself must have suppport (Zen+ or newer) so it'd be interesting to see if you guys get it to work.

Roger wrote: My problem was solved by support from NL. Thanks to ASRock support from the Netherlands.

Hi Guys, i have same problem with 990FX Fatality Killer with BIOS 1.60 taken from site (for NVME SSD support). Installed TPM on the motherboard, recognized from BIOS but not recognized by Windows 10. So if anyone has the bios that enable the TPM please send it to me either as PVT or attach it below to this post.

Thanks a lot.

Hello Roger, I have the same problem. Same 990FX Fatal1ty Killer board NO TPM.
I have already purchased an official ASRock TPM 2.0 for it.
Would it be possible to get the Bios from you?
Here my mail adress: ercan.oezkan@yahoo.com

https://imgur.com/a/sSUAych