Z690 Steel Legend-Corsair 3600mhz

After 3 bios updates,the problem still exist,so buyed other motherboard,problem solved,srry,but never again asrock.

fille1976 wrote: Hi, Here is the picture of stick 4. Its a set of 4x 8gb. https://ibb.co/xgb2G8K

thats samsung C-die...or really bad B-die bin
your memory sticks arent listed in mainboard memory QVL compatibility list
and C-die tops out there at 3200MHz with 4 sticks

you have few options, return ram and pick some which were tested
memory compatibility list can be found here
https://www.asrock.com/mb/Intel/Z690%20Steel%20Legend/index.asp#Memory

dont use XMP if it doesnt work, XMP is overclock for beginners...and as with any overclock, its not guaranteed to work, you can use XMP and set up your stable frequency, then tighten timings as much you can. that will be your baseline. once you know working frequency with its timings, then you just increase frequency alongside with loosening timings based on your baseline.
there are plenty of ram overclocking guides, but basicly its just mathematics

another option would be replacing CPU, as memory controller resides there, its not uncommon to have bad bin on memory controller

Edited by kerberos_20 - 18 Feb 2022 at 6:22am

Hi,

Here is the picture of stick 4.
Its a set of 4x 8gb.

https://ibb.co/xgb2G8K

Any info if this will be fixed please?

Hi fille1976,

Could you help to check which version is your memory module?

This will help us to simulate your system.

You can help it on the label of the memory module.

CMW32GX4M4D3600C18 ver.X.XX

At the same time, you can also try to verify your system with the below suggestions.

1. Enter BIOS setup and load BIOS default settings via [F9] key and press [F10] to save the settings and exit.
2. Load XMP profile (OC Tweaker\DRAM Configuration\Load XMP Setting). Press "F10" to apply the setting
3. Install one stick RAM on each slot by turns to repeat suggestion 2 to check if the problem relates to a specific RAM stick or slot.

All the best
ASRock TSD