Overclock help 970M Pro3

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   The memory speed is often showed as "half" the speed, since the 1600 refers to effective speed and not the actual DRAM frequency. DDR stands for double data rate and 800 x2 = 1600. For example on my system with DDR3-1333 RAM modules Speccy and CPU-Z both say my DRAM frequency is 665 MHz, as it should be. In other words you should be fine. If you have any doubts, you can run memory benchmarks before and after an overclock to see whether memory performance really drops to 50%.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
PetrolHead Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: 07 Oct 2015 Status: Offline Points: 403	Post Options Post Reply Quote PetrolHead Report Post Thanks(0) Quote Reply Topic: Overclock help 970M Pro3 Posted: 04 Jul 2016 at 8:04pm
	The memory speed is often showed as "half" the speed, since the 1600 refers to effective speed and not the actual DRAM frequency. DDR stands for double data rate and 800 x2 = 1600. For example on my system with DDR3-1333 RAM modules Speccy and CPU-Z both say my DRAM frequency is 665 MHz, as it should be. In other words you should be fine. If you have any doubts, you can run memory benchmarks before and after an overclock to see whether memory performance really drops to 50%.
	Ryzen 5 1500X, ASRock AB350M Pro4, 2x8 GB G.Skill Trident Z 3466CL16, Sapphire Pulse RX Vega56 8G HBM2, Corsair RM550x, Samsung 960 EVO SSD (NVMe) 250GB, Samsung 850 EVO SSD 500 GB, Windows 10 64-bit

bfollett Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 03 May 2016 Status: Offline Points: 15	Post Options Post Reply Quote bfollett Report Post Thanks(0) Quote Reply Posted: 05 May 2016 at 8:37pm
	I'm having trouble overclocking my CPU on my 970M Pro 3. I have 2X 2GB DDR3 1600 memory and if I leave my CPU config alone, the memory clocks correctly, but if I try to put in a manual clock multiplier for my CPU, the memory drops to DDR3 800. I have an FX6100 CPU which is factory clocked at 3300MHz. If I try to adjust just the multiplier to 19.5 to get the CPU to run at 3800MHz (which ran fine on my old motherboard), the memory drops to half speed. I can see this both in the bios or running CPU-Z in WIndows... Any ideas? Thanks, Bob